New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Pompano Beach pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Replacement Across Sunrise
Window replacement in Sunrise runs $800-$1,500 per opening for standard impact-rated units, with most full-frame jobs in 1970s CBS homes requiring permit pulls under Broward County’s High Velocity Hurricane Zone rules. Our crews serve Sunrise from the Miami office, and we carry the full product-approval documentation your building inspector will ask for. Call (754) 253-0713 to schedule your measured survey - the written quote you receive is the same document we install from, with no change orders.
We’ve worked the planned communities from Sunrise Golf Village to Welleby, and the pattern is consistent: original aluminum-frame jalousie and horizontal slider windows installed before the 1994 code changes, now failing at the seals and impossible to legally replace without Miami-Dade NOA-certified impact glazing. That specific combination - aging CBS construction plus strict HVHZ compliance - is what separates a proper Sunrise window job from a generic swap.
Why Sightline Windows & Doors Pompano Beach Is Sunrise’s Preferred Window Replacement Company

Sightline is independently owned and operated under the Haven Standard, which has governed every one of the 18,000+ openings we’ve installed since 2012. In Sunrise, that standard means your measured survey is a document you keep, your written price is fixed before any work starts, and your photo record documents every stage. We don’t do verbal estimates or “we’ll see once we’re in there” pricing.
Our technicians are background-checked, uniformed, and identified by license number before arrival - Haven Clause 3, Verified Crews. The person at your door in Sunrise is the person on the record.
Live phone coverage runs 24/7, not a callback queue. When you call (754) 253-0713, a human answers. For Sunrise homeowners researching contractors before making contact, we also offer a Free Second Opinion on Any Written Estimate - bring us a competitor’s quote and we’ll review it at no charge, specifically checking whether it includes the HVHZ product approvals and permit costs your job actually requires.
Before
AfterOur Window Replacement Services in Sunrise
Full Frame Replacement
Most Sunrise homes built between the 1960s and 1980s need this. The original aluminum frames in CBS block are painted over, corroded at the fasteners, and set in rough openings that predate modern design pressure requirements. We remove the entire frame down to the block, install new HVHZ-compliant framing with proper flashing integration, and secure Miami-Dade NOA documentation for inspection. In Sunrise Golf Village and Welleby, we’ve seen decades of layered paint and failed sealant that hides block deterioration - our measured survey catches this before quote, not during install.

Insert Window Replacement
Where the original frame is structurally sound and the opening is square, an insert replacement fits a new impact-rated unit inside the existing frame. This works in some Sunrise garden condominiums and later-built townhomes where the original installation was cleaner. The catch: the existing frame must still meet design pressure transfer requirements under HVHZ rules. We test and document this during survey. If it won’t pass, we quote full frame instead - no bait-and-switch at install.

Vinyl Replacement Windows
Vinyl frames with impact-rated laminated glass are available from PGT and CWS in white and tan standard colors. For Sunrise HOAs with strict covenants, vinyl may not match the original bronze or mill-finish aluminum profile. We verify HOA requirements against our product lines before quoting. ECO Window Systems and ViewLux also offer aluminum-clad options that carry the required NOAs while matching aesthetic requirements in communities like Sunrise Lakes.

Energy-Efficient Upgrade
Broward County’s cooling load is extreme, and original single-pane windows in Sunrise homes are essentially uninsulated gaps in your envelope. We specify U-factor and SHGC values that meet or exceed the 2023 Florida Energy Conservation Code - typically U-factor of 0.30 or lower and SHGC of 0.25 or lower for east- and west-facing openings. These numbers are printed on your quote, not vague “energy efficient” labels. The federal 25C energy credit applies to qualifying units: 30% of product cost, up to $600 per year.

Impact-Rated Glazing
This is not optional in Sunrise. Every replacement window must carry a Miami-Dade NOA or Florida Product Approval with large-missile impact rating, and the installed unit must match the approved configuration exactly. We source from PGT, CGI, CWS, and ES Windows - all with verified HVHZ approvals - and the large-missile rating labels remain visible for inspector verification. Your wind mitigation report, which supports insurance premium credits averaging around 25% on the windstorm portion, depends on correct documentation of these ratings.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sunrise

We specify from eight manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - chosen by what your opening requires, not by what we have in stock. For Sunrise’s dual-approval challenge, we frequently draw on PGT’s bronze-finish impact single-hung units and CGI’s mill-finish aluminum line, both with extensive Miami-Dade NOA coverage for CBS block installations. Local inventory and direct manufacturer relationships mean custom-color or specific-profile orders don’t add weeks to your timeline beyond standard fabrication.
Common Window Replacement Problems We See in Sunrise Homes
- Failed jalousie operators and cracked single-pane glass in 1970s CBS ranches. These units predate every modern code and cannot be legally replaced with like-for-like. The labor to remove decades of painted-over aluminum from concrete block exceeds wood-frame removal by 30-50%.
- Wind-driven rain infiltration at slider threshold seals. Broward’s 60+ inches of annual rainfall, delivered in violent afternoon convective storms, overwhelms the original vinyl pile weatherstripping on 1980s horizontal sliders. Water enters at the sill track and migrates behind stucco, causing hidden damage.
- HOA rejection of code-compliant units for aesthetic mismatch. Many Sunrise planned communities require bronze or mill-finish aluminum to match original profiles. A white vinyl impact window with perfect NOA documentation still fails HOA review - we verify both approvals before ordering.
- Out-of-area contractors quoting non-HVHZ products. Windows approved for Orlando or Tampa may carry Florida Product Approval but lack the Miami-Dade NOA required in Broward’s HVHZ. These jobs fail inspection, leaving the homeowner with unpermitted work and no insurance documentation.
Pricing for Window Replacement in Sunrise, FL

Standard impact single-hung windows in Sunrise run $900-$1,800 per unit installed, depending on frame material, size, and floor height. Large picture windows or custom geometric openings range $2,500-$5,000. Whole-home packages for typical 1970s-80s Sunrise ranches with 12-18 openings start around $8,000 and run to $25,000+ for full-frame replacement with premium aluminum impact units.
What moves your price: opening count, whether original frames are reusable (rare in pre-1994 Sunrise homes), floor height (second-story carries ladder and scaffold costs), and the specific HOA color/profile requirements that may limit manufacturer choice. Permit and inspection fees are itemized on your written quote, not absorbed into a rounded figure.
Call (754) 253-0713 for your measured survey. The written price we leave with you is the price on the final invoice - Haven Clause 1, Have it in writing.
What Window Replacement Costs in Sunrise
| Product/Scope | Installed Price Range in Sunrise |
|---|---|
| Standard impact window (fixed or single-hung) | $800 - $1,500 |
| Impact single-hung, mid-size opening | $900 - $1,800 |
| Large picture window or custom geometric | $2,500 - $5,000 |
| Whole-home package (12-18 openings, full frame) | $8,000 - $25,000+ |
These ranges reflect full-frame replacement in CBS block construction with Miami-Dade NOA products, permit pull, and inspection completion - the only legal way to do this work in Sunrise’s HVHZ. Insert replacements in qualifying openings may fall at the lower end; jobs requiring custom bronze finish or HOA-matched profiles may run higher. Your measured survey determines the exact scope.
We include one free in-home measure and written quote. Bring a competitor’s estimate and we’ll review it at no charge - specifically checking for missing permit costs, non-HVHZ product approvals, or undisclosed frame-removal labor.
Florida Pays You Back

Several programs reduce your net cost for compliant window replacement in Sunrise:
- My Safe Florida Home: Matching grants up to $10,000 for qualifying wind-mitigation upgrades, including impact window and door replacement. Program funds are subject to legislative appropriation; we guide you through eligibility documentation.
- Florida sales-tax exemption: Impact-resistant windows and doors are exempt from state sales tax - a 6% savings on material cost that applies at purchase.
- Federal 25C energy credit: 30% of product cost, up to $600 per year, on qualifying energy-efficient units meeting specified U-factor and SHGC thresholds.
- Windstorm premium credits: After installation and wind-mitigation inspection ($75-$150), carriers typically credit around 25% on the windstorm portion of your premium - though final numbers are set by your specific insurer and policy.
We document every rating and label needed for these programs, but we don’t guarantee approval - programs and carriers set final eligibility.
We Also Serve Cities Near Sunrise
Our crews work across Broward County from the Miami office, with regular routes through Sunrise, Pompano Beach, Oakland Park, Deerfield Beach, and Margate. The same Haven Standard - written price before work, verified crews, documented photo record - applies to every opening. If you’re comparing options across cities, our Window Replacement hub page details our full service structure and manufacturer specifications.
Serving Sunrise, FL - Our Local Coverage Area

We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Sunrise
Yes. Every window replacement in Sunrise, even a single jalousie panel in a 1970s ranch, falls under Broward County’s HVHZ rules and requires a Miami-Dade Notice of Acceptance or Florida Product Approval with HVHZ compliance. The building department will inspect for proper labeling and large-missile rating verification. Call (754) 253-0713 and we’ll confirm the exact NOA documentation your specific opening requires - estimates are free.
Yes. Many Sunrise planned communities - Sunrise Golf Village, Welleby, Sunrise Lakes - maintain 1970s-era covenants requiring frame color and profile match to original installation. A perfectly code-compliant white vinyl window can fail HOA architectural review. We verify both building department and HOA requirements before quoting, and we source PGT, CGI, and CWS units in bronze and mill-finish aluminum specifically for this dual-approval hurdle.
Properly documented impact glazing typically supports windstorm premium credits averaging around 25% on the windstorm portion, after a qualified wind-mitigation inspection ($75-$150). The key is correct documentation: large-missile rating labels must remain visible, and the installed configuration must match the Miami-Dade NOA exactly. We provide the photo record and product documentation your inspector needs; your carrier sets the final credit. Call (754) 253-0713 to review what documentation your current policy requires.
Three factors: the original aluminum frames are embedded in concrete block, not wood, so removal is labor-intensive; the rough opening must be re-flashed to current HVHZ standards; and the replacement must be a full-frame impact-rated unit with Miami-Dade NOA, not a simple glass swap. In a recent Sunrise Golf Village job, we removed 1979 jalousie frames, installed bronze-finish PGT impact units, and passed inspection on first review - but the frame removal alone added significant labor over a wood-frame installation. Call (754) 253-0713 for a measured survey of your specific openings.
For Sunrise’s climate zone, we specify U-factor of 0.30 or lower and SHGC of 0.25 or lower on east- and west-facing openings to meet or exceed current Florida Energy Conservation Code. North- and south-facing openings may use slightly higher SHGC values. These specifications are printed on your written quote with manufacturer documentation, not generic “energy efficient” claims. The federal 25C credit applies to qualifying units. Call (754) 253-0713 and we’ll run the specific calc for your home’s orientation and opening count.
Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Sunrise since 2012 under the Haven Standard.
Six Reasons Homeowners Choose Sightline Windows & Doors Pompano Beach
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Pompano Beach Services
