New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Pompano Beach pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
PGT Custom & Geometric Windows in Pompano Beach: What to Know First
As an independent PGT service provider in Pompano Beach, we install and replace PGT custom and geometric windows with measured surveys you keep, written prices before any work starts, and a documented photo record when we’re done. Most PGT custom window jobs in Broward County run 2-4 weeks from survey to installation, depending on glass tempering and frame finishing. We’re not PGT authorized; we work on what you already own or want specified, and we quote in dollars on the page because Haven Clause 1 says the measurement and the price are the same document.
This page is for Pompano Beach homeowners who need arched, round-top, trapezoid, or oversized PGT openings installed or replaced, and who want to know what fails, what it costs, and who’ll be standing in their living room before they make the call. Call (754) 253-0713 to schedule your free estimate.
How PGT Products Fail - and How We Fix Them
- PGT WinGuard custom shapes with seal drift in coastal salt air. The curved or angled frames on WinGuard geometric units create more seam perimeter per square foot than standard rectangles, and the dual-seal system degrades faster within two miles of the Atlantic. We see this on oceanfront homes in the Pompano Beach waterfront corridor. We pull the sash, document the seal path with photos you receive, and reinstall with OEM-compatible glazing tape rated for ASTM E1996 pressure cycling, not generic butyl.
- PGT EnergyVue arched tops with thermal bowing. The aluminum-clad frame on EnergyVue custom shapes carries a different expansion coefficient than the vinyl core, and south-facing arched units in Pompano Beach take 10+ hours of direct summer load. The result is a visible bow at the apex that cracks the IG spacer. We measure the sightline deviation to 1/16 inch, specify a warm-edge spacer upgrade if the unit is being remanufactured, and shim the rough opening to compensate for the predicted seasonal movement.
- PGT PremierVue oversized geometric units with hardware torque failure. Custom shapes over 60 united inches use heavier glass and often ship with standard hinges that weren’t torque-rated for the actual sash weight. The pivot point drifts, the weatherstrip compresses unevenly, and the lock points misalign. We calculate the actual sash weight from glass thickness and frame extrusion, then specify the correct hinge grade, which PGT’s catalog lists but which original installers often skip to save $12 per unit.
- PGT WinGuard Aluminum geometric windows with weep blockage from Pompano Beach pollen and sand. The sloped sill on custom shapes has smaller weep channels than rectangular units, and the combination of tabebuia season in March-April and onshore sand fills them fast. Water backs into the track, stains the interior sill, and the homeowner thinks the window is leaking. We clear the weeps with controlled air, install insect-resistant weep covers that don’t block drainage, and show you the before photo.
- PGT custom laminated glass with edge delamination after impact events. The interlayer in PGT’s laminated custom shapes can separate at the perimeter if the unit took a debris hit but didn’t shatter, a common post-storm finding in Pompano Beach. The glass looks intact, but the interlayer has micro-separated, and the next pressure cycle will fog the unit. We inspect with polarized light to confirm delamination, document it for your insurance record, and replace with matching OEM lamination specification.
Before
AfterOur PGT Custom & Geometric Windows Process
- 1
Measured survey you keep. Sonia Raman or a verified crew member arrives with license number on record, measures the rough opening and the existing frame in three planes, and notes wall squareness and header condition. You receive this document before we leave.
- 2
Written price before any work starts. The survey becomes the quote. Same document, same numbers. No change orders, no “discoveries” later. Haven Clause 1.
- 3
Parts decision: OEM or verified equivalent. For PGT custom shapes, we source OEM extrusions and glass when the series is current. For discontinued PGT lines, we use verified aftermarket profiles that match the sightline and glazing pocket, and we tell you which we’re using before you sign.
- 4
Installation with evidence. We seat the frame, flash the rough opening per AAMA 2400, shim for level and square, and photograph each stage. You receive the photo record within 24 hours of completion.
- 5
Operational test and documentation. Every moving sash is cycled 10 times, locks are checked for full engagement, and we record the final sightline measurement. The 365-Day Done Right Promise is stamped on your completion document, not offered as a courtesy.
- 6
Cleanup and final walkthrough. We leave the work area as we found it, review the photo record with you, and confirm the written warranty terms. Measure once, document it, then cut.
What PGT Custom & Geometric Windows Costs in Pompano Beach
| Scenario | Typical Range |
|---|---|
| PGT standard geometric shape replacement (trapezoid, octagon, triangle), installed | $890 - $1,450 |
| PGT arched or round-top custom window, installed | $1,200 - $2,100 |
| PGT oversized custom shape (72+ united inches), installed | $1,800 - $3,400 |
| PGT custom impact-rated geometric with laminated glass upgrade | $2,400 - $4,200 |
| Hardware torque upgrade on existing PGT custom sash | $180 - $340 |
| Seal replacement and re-glaze, PGT custom shape | $340 - $620 |
What moves the price: glass type (annealed, tempered, laminated), frame series (WinGuard, EnergyVue, PremierVue), whether the rough opening needs reframing, and whether weep or flashing correction is required. Coastal exposure within a mile of the Atlantic adds corrosion-resistant fastener specification. Call (754) 253-0713 for an exact quote - estimates are free, and we review competitor written estimates at no charge.
Why Pompano Beach Homeowners Call Sightline Windows & Doors Pompano Beach for PGT Work
We’ve installed and serviced PGT products in Pompano Beach since 2012, from new construction on the Intracoastal to retrofits in neighborhoods near Sample Road where the original custom shapes failed before the mortgage did. Our technicians are background-checked, uniformed, and identified by license number before arrival - Haven Clause 3. Every job carries the 365-Day Done Right Promise written into the Haven Standard, and leaves a documented photo record, not as an upsell, as standard evidence.
We also specify CGI, CWS, ES Windows, and ECO Window Systems when the opening or the budget points that direction. Eight manufacturer lines, specified by performance tier and price range, not by margin. The right product for the opening, and the right price on the page before anyone starts.
FAQs
No - manufacturer warranties cover defects in materials and workmanship, not who performed the installation, provided the work meets PGT’s installation requirements. As an independent PGT service provider, we follow AAMA and manufacturer specifications, document our work with photos, and provide you the records if a warranty claim arises. If your PGT unit has a factory defect, we identify it during survey and advise whether to route through PGT directly or handle through our process. Call (754) 253-0713 and we’ll review your warranty status during the free estimate.
Standard PGT custom shapes typically run 3-4 weeks from order to delivery; oversized or specialty-laminated units can extend to 6 weeks depending on tempering queue and glass sourcing. We don’t quote delivery dates we can’t verify with the manufacturer. Once the unit arrives, our installation is typically scheduled within 3-5 business days. Call (754) 253-0713 for current lead times on your specific PGT series.
Yes, in most cases. We maintain specifications for discontinued PGT extrusions and work with verified aftermarket manufacturers to match sightline dimensions, glazing pocket depth, and frame wall thickness. We tell you before you sign whether we’re sourcing OEM or equivalent, and we guarantee the fit under our 365-Day Done Right Promise. Call (754) 253-0713 to schedule a survey of your existing unit.
Repair makes sense when the frame is sound and the failure is isolated to glass, seals, or hardware - typically $340-$620 for seal work, $180-$340 for hardware. Replacement is the better value when the frame has corrosion, the IG unit has failed and the spacer is outdated, or when you’re upgrading to impact-rated glass for current code compliance. We give you both numbers in writing and let you decide. Call (754) 253-0713 for a free second opinion on any written estimate.
Yes, when the scope triggers Broward County permitting requirements - typically for impact-rated upgrades, rough opening modifications, or properties in flood zones. We pull the permit, schedule inspection, and pass it. The permit cost is listed as a line item in your written quote, not added later. Call (754) 253-0713 to confirm whether your specific job requires permitting.
Written by Sonia Raman, Owner, Sightline Windows & Doors Pompano Beach at Sightline Windows & Doors Pompano Beach, serving Pompano Beach and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Pompano Beach
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Pompano Beach Services
