New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Pompano Beach pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Windows & Doors in Margate, FL
Window and door installation in Margate runs $350-$1,200 per opening for standard vinyl or aluminum units, and $800-$2,400 for impact-rated replacements, with most whole-house jobs falling between $8,000 and $22,000 depending on frame condition and permit scope. We measure every opening on site, record the sightline and frame squareness, and hand you the written price before any work starts - Haven Clause 1. Call (754) 253-0713 to schedule your free measured survey.
Margate’s housing stock shapes every job we do here. The city built out rapidly from the late 1950s through the 1980s with affordable CBS ranch homes, most fitted with original aluminum single-pane or jalousie windows and hollow-core entry doors that now sit at 40-60 years of age. Because Margate lies entirely within Broward County’s High Velocity Hurricane Zone, any permitted replacement must carry a Miami-Dade/Broward Notice of Acceptance - a stricter standard than most of Florida. That means nearly every replacement we perform in Margate involves upgrading non-compliant frames to NOA-certified impact units, making code compliance central to the scope rather than an optional add-on. Our crews coordinate dispatch from the brand’s Miami office and serve Margate locally.
Why Margate Homes Are Different
Margate developed as an inland retirement suburb, built fast and built flat. The terrain here is low-lying enough that standing water after heavy rain is routine, and that moisture finds its way into aluminum window tracks, corrodes door hardware, and rots untreated sills. Summer humidity stays extreme from May through October, accelerating frame degradation even without direct salt spray - Margate sits 10-12 miles inland, spared the coastal corrosion that hits Pompano Beach or Deerfield Beach, but not the wind load or the wet.
The housing tells the rest of the story. Planned subdivisions from the 1960s and 1970s were built with cost-cutting aluminum jalousie windows, especially on rear bedrooms and Florida rooms. Broward County inspectors flag these immediately on any permit pull, so a single triggered permit often cascades into a whole-house replacement. Many homes also retain their original sliding-glass patio doors with non-rated glass and failing weatherstripping. For contractors, Margate is a market where the initial call is usually for one window, but the measured survey reveals a broader compliance gap - and the homeowner ends up replacing eight, twelve, or twenty openings to bring the house up to current HVHZ standards.
Before
AfterOur Main Margate Services
Most calls we field from Margate homeowners center on two needs: replacing aging, non-compliant windows with impact-rated units, and upgrading entry or patio doors that no longer seal against wind-driven rain. Here is how we approach each.
Window Replacement in Margate
We replace single-pane aluminum and jalousie windows throughout Margate’s older subdivisions, measuring each opening for squareness and frame depth before specifying NOA-certified impact or energy-efficient units. Because Broward inspectors will flag any non-compliant glass on permit, we specify PGT or CGI products with Miami-Dade/Broward NOA documentation included. Window Replacement in Margate covers our full process, from measured survey to final photo record.
Impact Windows & Doors in Margate
Every opening in Margate’s HVHZ zone must withstand design wind pressures that non-impact units cannot meet. We install laminated impact glass in vinyl or aluminum frames from ES Windows and CWS, with each product’s NOA number documented in your written scope before ordering. This is not an upgrade - it is the baseline for permitted work in this city. Impact Windows & Doors in Margate details the product tiers and performance ratings.
Sliding & Patio Doors in Margate
Original sliding-glass doors in Margate’s 1970s and 1980s stock typically run 6 or 8 feet wide with single-pane glass, corroded rollers, and weatherstripping that has hardened to plastic. We replace these with impact-rated multi-panel sliders from PGT or CGI, measured to the existing rough opening so the stucco and interior trim require minimal repair. Sliding & Patio Doors in Margate explains our sizing and hardware options.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Window Installation in Margate
Window installation in Margate almost always means removing aluminum single-pane or jalousie units from 1960s-1980s CBS construction and installing NOA-certified replacements that meet Broward County’s HVHZ requirements. The original frames are often embedded in stucco with minimal or degraded flashing, so water intrusion at the sill is common once we open the wall - a condition we document with photos before touching a tool. Window Installation is our core service, and Margate’s housing stock makes it the most frequent call we receive.
Single & Double Hung Windows
Signs you need it
Your sashes no longer stay open without a prop, the balance springs are broken, or you feel air movement at the meeting rail even when both sashes are locked.
What it costs in Margate
Standard vinyl single or double hung windows run $350-$650 per opening installed; impact-rated units with NOA certification range $650-$1,200 depending on frame material and glass package.
How we do it
We remove the existing frame, inspect the rough opening for rot or stucco damage, install new construction or replacement-grade vinyl or aluminum frames with integrated flashing, seal with backer rod and sealant per NOA detail, and finish with interior trim matched to your existing casing.
Horizontal Roller Windows
Signs you need it
The sash rolls with resistance or jumping, the locking mechanism no longer engages the keepers, or you can see daylight between the sash and frame when closed.
What it costs in Margate
Horizontal roller windows in standard vinyl cost $400-$750 installed; impact-rated rollers with laminated glass and HVHZ certification run $700-$1,350 per opening.
How we do it
We measure the existing pocket width and height to the nearest 1/8 inch, order the replacement with the correct roller and screen configuration, remove the old unit, set the new frame on a bed of sealant, secure through the jamb per manufacturer detail, and operate-test the sash before leaving.
What Window Installation Costs in Margate
| Item | Typical range in Margate |
|---|---|
| Standard vinyl single/double hung | $350 - $650 |
| Impact-rated single/double hung | $650 - $1,200 |
| Impact-rated horizontal roller | $700 - $1,350 |
How long does window installation take in Margate?
Most Margate homes see 8-15 windows replaced in one to two working days, assuming standard CBS construction with no structural repair needed. Permits add 5-10 business days for Broward County review before we can schedule installation. Call (754) 253-0713 to schedule your free measured survey and we will confirm the timeline with your specific scope.
Will Broward County require permits for my window replacement?
Yes - any window replacement in Margate’s HVHZ zone requires a building permit with NOA documentation for each product. We pull the permit, submit the NOA sheets, and schedule inspection as part of our standard scope; the permit cost is itemized in your written quote, not hidden. Call (754) 253-0713 and we will walk through the permit process for your address.
Door Installation in Margate
Door installation in Margate typically involves replacing original hollow-core entry doors or non-rated sliding patio units from 1960s-1980s construction with HVHZ-compliant impact doors that carry Miami-Dade/Broward NOA certification. The existing frames are often set in concrete block with minimal insulation, and the threshold is frequently rotted or out of level from decades of moisture exposure. Door Installation covers our full measurement and specification process.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your front door shows daylight at the jamb, the deadbolt no longer seats flush, or the inspector flagged the non-rated glass on a prior permit pull.
What it costs in Margate
Impact-rated fiberglass or steel entry doors with laminated glass sidelites run $1,800-$3,500 installed; solid-panel impact doors without glass start at $1,200.
How we do it
We measure the rough opening and check the threshold for level, specify a Therma-Tru or CGI impact-rated unit with documented NOA, remove the old door and frame, install the new pre-hung unit with shims and structural screws through the jamb into the block, and seal with backer rod and sealant per manufacturer detail.
French & Double Doors
Signs you need it
The inactive panel no longer seals at the astragal, you see water staining at the sill after rain, or the multipoint lock no longer engages all keepers simultaneously.
What it costs in Margate
Impact-rated French or double door sets in vinyl or aluminum frames cost $2,200-$4,500 installed depending on width, glass package, and hardware grade.
How we do it
We verify the rough opening width and sill condition, specify a PGT or ES Windows impact-rated unit with multipoint locking, set the frame on a bed of sealant, plumb both jambs independently, install the active and inactive panels, adjust the multipoint hardware for full engagement, and test water deflection with a hose before leaving.
What Door Installation Costs in Margate
| Item | Typical range in Margate |
|---|---|
| Impact-rated entry door with glass | $1,800 - $3,500 |
| Solid-panel impact entry door | $1,200 - $2,200 |
| Impact-rated French/double door set | $2,200 - $4,500 |
Do I need an impact-rated door if my windows are already impact-rated?
Yes - Broward County’s HVHZ ordinance requires all exterior openings, including doors, to meet the same wind-load and missile-impact standards; mixing rated and non-rated openings will fail inspection. We specify NOA-certified impact doors that match your window performance tier. Call (754) 253-0713 for a free measured survey and written quote.
Can you match my existing door size in a hurricane-rated unit?
Most standard entry door sizes - 2’8″, 3’0″, and 3’6″ widths in 6’8″ or 8’0″ heights - are available in impact-rated fiberglass or steel from Therma-Tru and CGI with NOA documentation; custom sizes require longer lead times but are specifiable. Call (754) 253-0713 and we will confirm availability for your exact opening.
Energy-Efficient Windows in Margate
Energy-efficient window installation in Margate addresses the specific penalty of 1960s-1980s single-pane aluminum frames: summer cooling loads that run 30-50% above modern code, measured by the utility bills our customers hand us. The humidity here compounds the problem - conductive aluminum frames sweat in July and August, promoting mold at the sill and deterioration of interior trim. Energy-Efficient Windows details the glazing packages and performance ratings we specify.
Low-E & Argon Gas Glass
Signs you need it
Your current windows are single-pane clear glass, rooms facing west or south are noticeably hotter, or you can feel radiant heat through the glass at midday.
What it costs in Margate
Double-pane Low-E with argon fill in a vinyl frame runs $400-$750 per opening; upgrading to impact-rated Low-E/argon adds $250-$450 per unit for the laminated glass and reinforced frame.
How we do it
We measure each opening, specify the appropriate SHGC and U-factor for the exposure - lower SHGC for west-facing units in Margate’s afternoon sun - order from CWS or ECO Window Systems with documented performance values, and install with continuous perimeter sealant to prevent argon loss over time.
ENERGY STAR Replacement Windows
Signs you need it
You are replacing windows for efficiency and want the performance verified by independent NFRC testing, not just manufacturer claims.
What it costs in Margate
ENERGY STAR certified vinyl replacement windows range $450-$850 per opening; impact-rated ENERGY STAR units from PGT or ES Windows run $750-$1,400.
How we do it
We verify the ENERGY STAR climate zone rating for South Florida, select products with the required U-factor and SHGC from our manufacturer lines, document the NFRC label numbers in your written scope, and install with attention to air sealing at the frame perimeter to achieve the rated performance.
What Energy-Efficient Windows Costs in Margate
| Item | Typical range in Margate |
|---|---|
| Low-E/argon double-pane vinyl | $400 - $750 |
| Impact-rated Low-E/argon | $650 - $1,200 |
| ENERGY STAR certified impact-rated | $750 - $1,400 |
Will energy-efficient windows actually lower my FPL bill in Margate?
Yes - our Margate customers with full-house Low-E/argon replacements typically see cooling-season reductions of 15-25%, though results vary with insulation, duct condition, and thermostat habits. We document the before-and-after performance values in your scope so you know what to expect. Call (754) 253-0713 for a free measured survey and written estimate.
Do I need impact-rated glass if I only want energy efficiency?
If your replacement requires a permit - which any exterior window replacement in Margate’s HVHZ zone does - the glass must be impact-rated regardless of efficiency goals; we specify units that meet both requirements, with Low-E coating and argon fill inside the laminated impact glass. Call (754) 253-0713 and we will explain the combined performance package.
Impact Garage Doors in Margate
Impact garage door installation in Margate is increasingly required as homeowners discover that their original non-rated sectional doors are the weakest point in their HVHZ envelope - a 9×7 or 16×7 opening with thin-gauge steel and no wind-load certification will fail before any impact window. Many Margate homes from the 1970s and 1980s have attached garages with these original doors, and the conversion to an impact-rated unit often triggers the first permit the property has seen in decades. Impact Garage Doors covers our wind-load engineering and installation process.
Hurricane-Rated Garage Doors
Signs you need it
Your garage door lacks a wind-load sticker, the panels flex visibly in moderate wind, or your insurance inspection flagged the door as non-compliant.
What it costs in Margate
Impact-rated sectional garage doors for single-car openings run $1,500-$2,800 installed; double-car units range $2,200-$4,000 depending on insulation, window inserts, and wind-load rating.
How we do it
We measure the opening width, height, and headroom, verify the spring and track system capacity for the heavier impact-rated door, specify a wind-load-certified unit with the appropriate design pressure for Margate’s HVHZ zone, and install with reinforced struts, heavy-duty hinges, and a track system rated for the full wind load.
Wind-Load Code Compliance
Signs you need it
You are selling or refinancing and the buyer’s inspection requires documentation that all exterior openings meet current HVHZ standards, including the garage.
What it costs in Margate
Full wind-load compliance upgrades - door, track, springs, and hardware - for a standard double-car opening run $2,500-$4,500; engineering documentation and permit coordination are included.
How we do it
We assess the existing opening and structure, specify the required wind-load rating from the Florida Building Code HVHZ tables, order the door with Miami-Dade/Broward NOA, remove the old door and track, install the new wind-load-rated system, and coordinate inspection with Broward County.
What Impact Garage Doors Costs in Margate
| Item | Typical range in Margate |
|---|---|
| Single-car impact-rated garage door | $1,500 - $2,800 |
| Double-car impact-rated garage door | $2,200 - $4,000 |
| Full wind-load compliance upgrade | $2,500 - $4,500 |
Does my garage door need to be impact-rated if it’s not facing the street?
Yes - Broward County’s HVHZ ordinance applies to all exterior openings regardless of orientation; wind-borne debris and pressure differentials do not distinguish front from rear or side. We specify the same wind-load rating for all garage door orientations. Call (754) 253-0713 for a free assessment and written quote.
Can you reuse my existing garage door opener with a new impact door?
Sometimes - if the opener is within 5-7 years old and rated for the heavier door weight; older openers typically lack the torque and safety sensor configuration for modern impact-rated doors, and we will note this in your written scope before work begins. Call (754) 253-0713 and we will inspect your opener during the measured survey.
Custom & Geometric Windows in Margate
Custom and geometric window installation in Margate solves the mismatch between distinctive architectural details and the rectangular stock sizes that most contractors prefer to install. We regularly encounter 1970s and 1980s homes with arched transoms, octagonal accent windows, or oversized fixed glass in entryways - all originally single-pane and now failing, but shaped in ways that standard replacement catalogs cannot address. Custom & Geometric Windows explains our measurement and fabrication process for non-standard openings.
Geometric & Shaped Windows
Signs you need it
You have triangular, octagonal, trapezoidal, or circular windows that are leaking, fogged, or framed in deteriorating aluminum that no standard catalog size will replace.
What it costs in Margate
Custom geometric shapes in impact-rated laminated glass with vinyl or aluminum frames run $800-$2,000 per opening; complex multi-sided units with integral grids or custom exterior colors reach $1,500-$3,000.
How we do it
We template the opening on site with digital angle measurements and chord dimensions, send the template to the manufacturer for CAD confirmation, order the unit from PGT or ViewLux with NOA documentation, and install with custom flashings fabricated to match the irregular geometry.
Arched & Curved Windows
Signs you need it
Your arched transom or Palladian window has separated at the mullion, the curved glass is single-pane with visible UV damage to interior finishes, or the radius frame has corroded at the sill.
What it costs in Margate
True-radius arched windows in impact-rated laminated glass cost $1,200-$2,800 depending on radius, height, and whether the unit is fixed or operable; segmented arches fall at the lower end of that range.
How we do it
We measure the springline, rise, and chord of the arch, verify the rough opening radius against the manufacturer’s forming capability, specify a PGT or CGI custom arched unit with documented NOA, and install with pre-formed flashing kits designed for curved head conditions.
What Custom & Geometric Windows Costs in Margate
| Item | Typical range in Margate |
|---|---|
| Custom geometric shape, impact-rated | $800 - $2,000 |
| Complex multi-sided with grids/color | $1,500 - $3,000 |
| True-radius arched, impact-rated | $1,200 - $2,800 |
How long does a custom window order take in Margate?
Standard lead times for custom geometric or arched impact windows from PGT or ViewLux run 6-10 weeks from template approval; we coordinate template measurement, CAD confirmation, and production scheduling so you have one timeline, not three. Call (754) 253-0713 to start the template process and we will confirm current lead times.
Can you match a custom window to my existing grid pattern?
Yes - we document your existing SDL or GDL grid pattern during the measured survey, specify the matching bar width and profile from the manufacturer’s custom options, and confirm the layout with you before ordering; the grid specification is written into your scope, not assumed. Call (754) 253-0713 to schedule your free measured survey.
Brands We Service in Margate
We install and service eight verified manufacturer lines in Margate: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. We stock common hardware, balances, and weatherstripping for PGT and CGI locally, which means most Margate repair calls for those brands resolve in one visit. For full specifications and performance tiers, see our brands.
Pricing for Windows & Doors in Margate, FL
| Service | Typical range in Margate |
|---|---|
| Standard vinyl single/double hung window | $350 - $650 |
| Impact-rated single/double hung window | $650 - $1,200 |
| Impact-rated horizontal roller window | $700 - $1,350 |
| Low-E/argon double-pane vinyl window | $400 - $750 |
| Impact-rated entry door with glass | $1,800 - $3,500 |
| Impact-rated French/double door set | $2,200 - $4,500 |
| Single-car impact-rated garage door | $1,500 - $2,800 |
| Double-car impact-rated garage door | $2,200 - $4,000 |
| Custom geometric window, impact-rated | $800 - $2,000 |
| True-radius arched window, impact-rated | $1,200 - $2,800 |
Prices in Margate push toward the higher end when we encounter degraded CBS block at the rough opening, failed stucco that requires restoration, or original jalousie windows with embedded frames that must be cut out rather than pocket-replaced. The written quote you receive after our measured survey is the final invoice - Haven Clause 1, no change orders, no surprises.
Neighborhoods We Serve in Margate
We work across Margate’s established subdivisions, from the 1960s ranch homes near Coral Springs Drive to the 1980s developments off Atlantic Boulevard and State Road 7. Response time for initial measured surveys is typically 24-48 hours from call, with installation scheduled once permits clear.
- Coral Gate
- Oriole-Margate Estates
- Sansom Park
- Plantation Acres (Margate section)
- Edgewood
Service Area - Cities Near Margate
Our crews serve the full Broward County HVHZ corridor from our Miami office, with measured surveys and installation available in Coral Springs, FL, Pompano Beach, FL, Plantation, FL, and Deerfield Beach, FL. Each city carries the same HVHZ requirements but presents distinct housing stock conditions that we document before quoting.
Serving Margate, FL - Our Local Coverage Area
We’re based in the Margate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Margate
Yes - any exterior window or door replacement in Margate requires a Broward County building permit with Miami-Dade/Broward NOA documentation for each product, because the city lies entirely within the High Velocity Hurricane Zone. We pull the permit, submit the paperwork, and schedule inspection as part of our standard scope.
Clear access to each window and door interior and exterior, unlock any security screens or shutters, and gather your prior permit or inspection reports if available; we handle the measurement, photo documentation, and product specification on site, and you keep the written survey.
Yes - we provide the product data sheets, color samples, and NOA documentation that most Margate HOAs require for architectural review, and we note any HOA design guidelines in your written scope before ordering to avoid approval delays.
Call (754) 253-0713 to schedule your free measured survey. Every job we complete in Margate carries the 365-Day Done Right Promise, a documented photo record, and a written price that does not change.
Six Reasons Homeowners Choose Sightline Windows & Doors Pompano Beach
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Pompano Beach Services
What Neighbors Say About Sightline Windows & Doors Pompano Beach
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Margate Customers Say
"Replaced eight windows. They showed me the U-factor on the units they were actually fitting rather than the brochure numbers."
- Kofi B."The survey measurements and the quote were the same piece of paper. Nothing changed on install day, which is not what happened with the two other companies we had out."
- Annette R."Front door install went smoothly. Written warranty, clear price, no pressure to upgrade anything."
- Nils H.