New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Pompano Beach pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Windows & Doors in Fort Lauderdale, FL
Window installation in Fort Lauderdale runs $650-$1,400 per opening for standard vinyl impact-rated units and $1,200-$2,800 for aluminum or custom-spec jobs, with most homes in Coral Ridge, Rio Vista, and the canal-front Isles neighborhoods needing full-frame replacement of original 1950s-1970s single-pane aluminum or jalousie windows. Every install we perform in Broward County’s High-Velocity Hurricane Zone carries a Miami-Dade or Broward County Notice of Acceptance (NOA), documented in the written scope you receive before work starts. Call (754) 253-0713 to schedule your measured survey; the quote we produce from that document is the price on the final invoice.
Our crews coordinate dispatch from the Miami office and work Fort Lauderdale homes daily. The salt-laden humidity off the Atlantic and the 165+ miles of inland canals here corrode standard aluminum extrusions and hardware faster than even 30 miles inland, so we specify anodized finishes, impact-rated vinyl, or stainless hardware based on what the opening actually faces. Window Installation is our highest-volume service in this market, driven by insurance non-renewals for non-impact glazing.
Why Fort Lauderdale Homes Are Different
Fort Lauderdale sits inside Broward County’s High-Velocity Hurricane Zone, where every window and door replacement - garage doors included - must carry a Miami-Dade or Broward County Notice of Acceptance. Broward building inspectors specifically flag products approved only under Miami-Dade NOA when a Broward-specific NOA is also required; a window that passes in Hialeah can fail inspection here. The city’s 165+ miles of inland canals mean a disproportionate share of homes, particularly in Coral Ridge, Rio Vista, and the Las Olas Isles, face constant brackish salt-air exposure that accelerates frame and hardware corrosion even on code-compliant installs. Marine-grade finishes are a practical specification, not an upsell.
The dominant housing stock is 1950s-1970s concrete block construction, much of it still fitted with original single-pane aluminum frames or jalousie windows that provide zero hurricane protection and are increasingly triggering insurance non-renewals. Florida’s active private-insurance market is aggressively surcharging or dropping Broward County homeowners who retain non-impact glazing, turning hurricane season into a year-round demand driver for full replacement.
Before
AfterOur Main Fort Lauderdale Services
Fort Lauderdale homeowners contact us most often for full window replacement and impact-rated door systems. These three services have dedicated Fort Lauderdale pages with deeper product and pricing detail:
Window Replacement in Fort Lauderdale
We replace original single-pane aluminum and jalousie windows throughout Coral Ridge, Rio Vista, and the canal-front Isles with HVHZ-approved impact-rated units from PGT, CGI, and CWS. Every job begins with a measured survey you keep, and the written quote cannot differ from that document. Window Replacement in Fort Lauderdale covers our full product range and specification process.
Impact Windows & Doors in Fort Lauderdale
Full-perimeter impact protection for Fort Lauderdale homes requires products with both Miami-Dade and Broward County NOA certification, proper fastening to CBS construction, and marine-grade hardware for canal-front exposure. We document every phase with photo evidence under Haven Clause 4. Impact Windows & Doors in Fort Lauderdale details our impact-rated product lines and code compliance process.
Sliding & Patio Doors in Fort Lauderdale
Multi-panel sliding systems in Fort Lauderdale must resist wind-borne debris while operating smoothly in salt-air conditions; we specify stainless rollers and marine-grade tracks for canal-facing openings. Our measured survey captures sill height, drainage plane, and impact rating requirements before any product is ordered. Sliding & Patio Doors in Fort Lauderdale covers our full sliding and hinged patio door range.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Window Installation in Fort Lauderdale
Window installation in Fort Lauderdale means removing 1950s-1970s single-pane aluminum or jalousie windows from concrete block construction and installing HVHZ-approved impact-rated units that satisfy both Miami-Dade and Broward County NOA requirements. The salt-air exposure from the Atlantic and inland canals accelerates corrosion on standard hardware, so we specify anodized aluminum, impact-rated vinyl, or stainless components based on each opening’s orientation and distance from water.
We perform this work under the Haven Standard that has governed every one of our 18,000+ installations since 2012: a measured survey you keep, a written price before any tool is lifted, and a documented photo record when the job is done. Window Installation service details are available on our hub page.
Single & Double Hung Windows
Signs you need it
Your original aluminum single-hungs rattle in wind, show corrosion at the sill, or your insurance carrier has flagged them for non-renewal.
What it costs in Fort Lauderdale
Standard vinyl impact-rated single or double hung windows run $650-$1,200 per opening installed; aluminum-framed or custom-color units range $1,100-$2,200.
How we do it
We remove the existing frame, inspect the CBS rough opening for moisture intrusion, install the new unit with Tapcon fasteners at specified spacing, seal with backer rod and polyurethane sealant, and document with before-and-after photos.
Horizontal Roller Windows
Signs you need it
Your existing rollers grind, the sash won’t stay on track, or you need impact-rated ventilation for a canal-facing bedroom.
What it costs in Fort Lauderdale
Horizontal roller windows in standard sizes run $700-$1,350 for vinyl impact-rated units and $1,200-$2,400 for aluminum or oversized configurations.
How we do it
We measure the daylight opening to 1/8 inch, specify stainless roller hardware for salt-air exposure, install with proper shimming and fastening to CBS, then test operation and document the sightline alignment.
What Window Installation Costs in Fort Lauderdale
| Item | Typical range in Fort Lauderdale |
|---|---|
| Vinyl impact-rated single/double hung (standard size) | $650 - $1,200 |
| Aluminum impact-rated single/double hung | $1,100 - $2,200 |
| Horizontal roller windows (vinyl, standard) | $700 - $1,350 |
How long does window installation take in Fort Lauderdale?
Most Fort Lauderdale homes see 8-15 openings completed in one to two days, with Broward County inspection scheduled within 48 hours of completion. Call (754) 253-0713 to schedule your measured survey; estimates are free.
Will my insurance accept the new windows?
HVHZ-approved impact-rated windows with current NOA documentation satisfy all Florida insurance requirements for wind mitigation; we provide the product approval paperwork with your invoice. Call (754) 253-0713 for a free estimate and documentation review.
Door Installation in Fort Lauderdale
Door installation in Fort Lauderdale requires HVHZ-approved impact-rated systems for all exterior openings, with Broward County inspectors specifically verifying both Miami-Dade and Broward NOA certification on the same product. The 1950s-1970s CBS homes in Coral Ridge and Rio Vista often have original hollow-core or un-rated steel doors that fail current codes and accelerate insurance non-renewals. Door Installation hub details cover our full entry, patio, and specialty door range.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your front door shows rust at the threshold, lacks a visible impact rating label, or your insurance inspection noted non-compliant entry protection.
What it costs in Fort Lauderdale
Impact-rated fiberglass or steel entry doors with HVHZ-approved glazing run $1,800-$3,500 installed; solid aluminum or custom-spec impact units range $2,800-$5,500.
How we do it
We verify the rough opening in your CBS wall, specify a Therma-Tru or ViewLux impact-rated door with proper jamb depth, install with stainless fasteners and composite shims, seal the threshold pan for water intrusion, and document with photo evidence.
French & Double Doors
Signs you need it
Your existing French doors leak at the center mullion, show frame separation, or lack impact-rated glass and hardware for hurricane season.
What it costs in Fort Lauderdale
Impact-rated French door pairs in standard widths run $2,200-$4,200 for vinyl-framed units and $3,500-$6,500 for aluminum or multi-point locking systems.
How we do it
We measure the combined daylight opening, specify a multi-point lock and stainless hinges for salt-air resistance, install with proper fastening to CBS and composite shimming, adjust the inactive panel for uniform sightlines, and photograph all hardware and sealant details.
What Door Installation Costs in Fort Lauderdale
| Item | Typical range in Fort Lauderdale |
|---|---|
| Impact-rated entry door (fiberglass/steel with glass) | $1,800 - $3,500 |
| Impact-rated entry door (aluminum/custom) | $2,800 - $5,500 |
| French door pair (impact-rated vinyl) | $2,200 - $4,200 |
Do I need a permit to replace my front door in Fort Lauderdale?
Yes, all exterior door replacements in Broward County require a building permit; we pull the permit, schedule inspection, and include both in your written scope. Call (754) 253-0713 for an exact quote; estimates are free.
Can you match my door to the HOA color requirements?
We specify factory-finished doors from PGT, CGI, and Therma-Tru with color-matched frames; the written quote includes the exact finish code for HOA approval before order. Call (754) 253-0713 to review your requirements.
Energy-Efficient Windows in Fort Lauderdale
Energy-efficient windows in Fort Lauderdale must balance solar heat gain control with impact-rated construction, as the city’s latitude and year-round cooling load make U-factor and SHGC performance as critical as hurricane resistance. Original 1950s-1970s single-pane aluminum windows in CBS homes throughout the Isles communities conduct heat directly into conditioned space, driving utility costs and failing current energy code for replacement. Energy-Efficient Windows hub details explain our full range of high-performance glazing options.
Low-E & Argon Gas Glass
Signs you need it
Your west- or south-facing rooms overheat by mid-afternoon, your utility bills spike in summer, or your existing glass lacks a Low-E coating visible at the edge.
What it costs in Fort Lauderdale
Low-E coated, argon-filled impact-rated insulated glass units run $750-$1,450 per opening in vinyl framing and $1,250-$2,400 in aluminum.
How we do it
We measure each opening’s solar orientation, specify the appropriate Low-E coating tier and argon fill for your elevation, install the IGU with warm-edge spacers to reduce thermal bridging, and document U-factor and SHGC values on your written scope.
UV-Blocking & Fade Protection
Signs you need it
Hardwood floors, artwork, or furnishings near windows show fading, or you need visible light without the damaging UV spectrum for a canal-facing great room.
What it costs in Fort Lauderdale
UV-blocking laminated impact-rated glass with 99% UV filtration runs $850-$1,650 per opening in standard sizes, with custom tints or gradients at $1,200-$2,200.
How we do it
We assess your interior exposure and fading risk, specify laminated glass with the appropriate interlayer for UV rejection while maintaining visible transmittance, install with standard impact-rated framing, and document light transmission values.
What Energy-Efficient Windows Costs in Fort Lauderdale
| Item | Typical range in Fort Lauderdale |
|---|---|
| Low-E/argon impact-rated (vinyl frame) | $750 - $1,450 |
| Low-E/argon impact-rated (aluminum frame) | $1,250 - $2,400 |
| UV-blocking laminated impact-rated | $850 - $1,650 |
Will energy-efficient windows lower my electric bill in Fort Lauderdale?
Properly specified Low-E/argon impact-rated windows typically reduce cooling load 15-25% in CBS homes with original single-pane aluminum; we document projected performance on your written scope. Call (754) 253-0713 for a measured survey and exact quote; estimates are free.
Do energy-efficient windows still meet hurricane code?
All our energy-efficient options are HVHZ-approved impact-rated systems; the Low-E coating and argon fill are added to code-compliant laminated or insulated laminated construction. Call (754) 253-0713 to review the specific NOA documentation for your job.
Impact Garage Doors in Fort Lauderdale
Impact garage doors in Fort Lauderdale must carry HVHZ approval with both Miami-Dade and Broward County NOA certification, a requirement many out-of-area contractors miss when specifying products approved only under Miami-Dade. The 165+ miles of inland canals mean garage doors on alley-facing or rear-lot garages in neighborhoods like Coral Ridge and Rio Vista face the same salt-air corrosion as front elevations, making stainless hardware and proper threshold sealing essential. Impact Garage Doors hub details cover our full wind-load rated product range.
Hurricane-Rated Garage Doors
Signs you need it
Your garage door lacks a visible HVHZ rating label, shows rust at the bottom section, or your insurance inspection flagged non-compliant garage door protection.
What it costs in Fort Lauderdale
Wind-load rated steel or aluminum garage doors with impact-resistant sections run $1,500-$3,200 for single-car openings and $2,400-$4,800 for double-car, with reinforced track systems at $400-$800 additional.
How we do it
We measure the rough opening and verify wind-load requirements for your Fort Lauderdale exposure category, specify a CWS or PGT hurricane-rated door with stainless rollers and hinges, install with reinforced struts and proper track fastening to CBS, and document rating labels and installation photos.
Wind-Load Code Compliance
Signs you need it
Your permit application was flagged for insufficient garage door wind-load documentation, or you’re replacing a non-rated door after an insurance non-renewal notice.
What it costs in Fort Lauderdale
Full wind-load upgrade including door, track reinforcement, and opener bracket modification runs $2,200-$4,500 for single-car and $3,200-$6,000 for double-car openings.
How we do it
We verify your home’s wind-borne debris region designation, specify the exact PSF rating required, install the complete assembly with engineer-stamped drawings if required, coordinate Broward County inspection, and provide all documentation for your insurance file.
What Impact Garage Doors Costs in Fort Lauderdale
| Item | Typical range in Fort Lauderdale |
|---|---|
| Hurricane-rated garage door (single-car) | $1,500 - $3,200 |
| Hurricane-rated garage door (double-car) | $2,400 - $4,800 |
| Wind-load upgrade with reinforcement | $2,200 - $4,500 |
Does my garage door need impact rating or just wind-load?
In Broward County HVHZ, garage doors must meet both wind-load and large-missile impact standards; we specify products with dual certification and document both on your written scope. Call (754) 253-0713 for an exact quote; estimates are free.
Can you reuse my garage door opener?
Most standard openers can be reinstalled on a new impact-rated door if the bracket and arm geometry match; we verify compatibility during the measured survey and note any required modifications on the written quote. Call (754) 253-0713 to schedule.
Custom & Geometric Windows in Fort Lauderdale
Custom and geometric windows in Fort Lauderdale solve the architectural mismatch when 1950s-1970s CBS homes in Coral Ridge and the Isles communities need impact-rated replacement for arched, circular, or otherwise non-rectangular original openings. These shapes require custom laminated glass fabrication and specialized framing extrusions that must still carry HVHZ-approved NOA certification, a combination only available from select manufacturer lines. Custom & Geometric Windows hub details cover our full shaped-window capabilities.
Arched & Curved Windows
Signs you need it
Your original arched windows leak at the radius, the curved sash no longer operates, or you need to maintain architectural character while achieving impact-rated protection.
What it costs in Fort Lauderdale
Custom arched impact-rated windows with radius-top or full-curve configuration run $1,800-$3,500 per opening in vinyl and $2,800-$5,200 in aluminum, with custom grid patterns at $300-$600 additional.
How we do it
We template the exact radius and chord dimensions on site, specify PGT or CGI custom-arch extrusions with laminated impact-rated glass, fabricate to measured survey tolerances, install with flexible sealant at the radius to accommodate thermal movement, and document sightline and sealant continuity.
Oversized Openings
Signs you need it
Your great room or master suite has a single opening exceeding 60 square feet that must be divided or reinforced to meet HVHZ span limitations, or you’re combining smaller openings into one view.
What it costs in Fort Lauderdale
Oversized impact-rated window systems with structural reinforcing or multi-panel configuration run $3,500-$7,500 per opening, with engineering and permit documentation included.
How we do it
We measure the full span, verify HVHZ maximum span tables for the specified product, engineer the mullion or reinforcing solution, coordinate structural drawings and Broward County plan review, install with crane access if required, and document every phase with photo evidence.
What Custom & Geometric Windows Costs in Fort Lauderdale
| Item | Typical range in Fort Lauderdale |
|---|---|
| Arched/curved impact-rated (vinyl) | $1,800 - $3,500 |
| Arched/curved impact-rated (aluminum) | $2,800 - $5,200 |
| Oversized opening system with engineering | $3,500 - $7,500 |
How long do custom windows take to fabricate?
Custom arched and oversized impact-rated windows typically require 8-12 weeks from measured survey to delivery; we provide the production schedule in writing with your quote. Call (754) 253-0713 to start the templating process; estimates are free.
Can you match the grid pattern on my original windows?
We template existing muntin or SDL patterns and specify matching grids from PGT or CGI custom programs; the exact pattern is noted on your measured survey and confirmed before fabrication. Call (754) 253-0713 to review your existing windows.
Brands We Service in Fort Lauderdale
We install and service PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux product lines in Fort Lauderdale, with parts and hardware stocked for common repair and adjustment needs. Most standard components are available within 48 hours; custom extrusions and glass match the manufacturer’s stated lead time. Our brands page details performance tiers and warranty terms by manufacturer.
Pricing for Windows & Doors in Fort Lauderdale, FL
| Service | Typical range in Fort Lauderdale |
|---|---|
| Vinyl impact-rated single/double hung window | $650 - $1,200 |
| Aluminum impact-rated single/double hung window | $1,100 - $2,200 |
| Horizontal roller window (vinyl, standard) | $700 - $1,350 |
| Impact-rated entry door (fiberglass/steel with glass) | $1,800 - $3,500 |
| Impact-rated entry door (aluminum/custom) | $2,800 - $5,500 |
| French door pair (impact-rated vinyl) | $2,200 - $4,200 |
| Low-E/argon impact-rated window (vinyl) | $750 - $1,450 |
| UV-blocking laminated impact-rated window | $850 - $1,650 |
| Hurricane-rated garage door (single-car) | $1,500 - $3,200 |
| Hurricane-rated garage door (double-car) | $2,400 - $4,800 |
| Arched/curved impact-rated window (vinyl) | $1,800 - $3,500 |
| Oversized opening system with engineering | $3,500 - $7,500 |
Prices in Fort Lauderdale push toward the higher end when openings require marine-grade hardware for canal-front exposure, structural reinforcing for oversized spans, or Broward-specific NOA products that out-of-area contractors do not stock. The price on your written quote is the price on your final invoice; Haven Clause 1 means the measurement and the quote are the same document.
Neighborhoods We Serve in Fort Lauderdale
Our crews work daily across Fort Lauderdale’s core residential neighborhoods, from the canal-front Isles communities to the interior CBS subdivisions. Most Fort Lauderdale addresses receive next-day scheduling availability from our Miami coordination office.
- Coral Ridge
- Rio Vista
- Las Olas Isles
- Victoria Park
- Tarpon River
Service Area - Cities Near Fort Lauderdale
We serve homeowners throughout central and northern Broward County, with crews dispatched daily from our Miami coordination office. Nearby cities include Plantation, FL, Pompano Beach, FL, Margate, FL, and Deerfield Beach, FL. Each receives the same Haven Standard process: measured survey, written price, verified crew, and documented photo record.
Serving Fort Lauderdale, FL - Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Fort Lauderdale
Yes, we pull all required Broward County building permits for window and door replacement, schedule inspections, and include permit fees in your written quote; the documentation is part of every job under Haven Clause 5. Call (754) 253-0713 to start the process.
Look for a current Miami-Dade or Broward County NOA label on the frame or sash; if it’s missing, dated before 2010, or specifies Miami-Dade only, your windows likely need replacement to satisfy current inspection standards. We verify NOA status during our free estimate and document compliance on your written scope.
Yes, our live coverage team accepts text messages at (754) 253-0713 and can initiate the measured survey scheduling process by text; you’ll still receive the written quote and photo documentation by email. Call or text to schedule your free estimate.
Six Reasons Homeowners Choose Sightline Windows & Doors Pompano Beach
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Pompano Beach Services
What Neighbors Say About Sightline Windows & Doors Pompano Beach
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fort Lauderdale Customers Say
"Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."
- Simone T."They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C."Replaced eight windows. They showed me the U-factor on the units they were actually fitting rather than the brochure numbers."
- Kofi B.