New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Pompano Beach pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Windows & Doors in Tamarac, FL
Window and door installation in Tamarac runs $650-$2,800 per opening depending on frame type, impact rating, and HOA specification requirements. Most jobs in this city involve removing original 1970s single-pane aluminum units and replacing them with Florida Product Approved or Miami-Dade NOA-rated products that satisfy both Broward County HVHZ code and the homeowner’s association architectural committee. We schedule measured surveys throughout Tamarac from our Miami office; call (754) 253-0713 and a live person will set the appointment.
Every replacement in Tamarac must clear two gates: the product itself must carry a valid Florida Product Approval or Miami-Dade Notice of Acceptance for High Velocity Hurricane Zone wind loads, and the installation must match the HOA’s written architectural standards. Crews who submit permits before confirming that second gate routinely get stop-work orders in this city. At Sightline, the measured survey we leave with you documents both the frame opening and the HOA color or profile requirement before any product is ordered.
Why Tamarac Homes Are Different
Tamarac was purpose-built from 1968 onward as one of Broward County’s first mass-scale planned retirement communities. That origin left an unusually dense concentration of 1970s-era HOA-governed condo and villa associations, many still running original single-pane aluminum jalousie and horizontal-slider windows. These units are flatly non-compliant with current HVHZ impact requirements and cannot be retrofitted to meet them; full replacement is the only path.
The housing stock is overwhelmingly 1968-1982 concrete block construction: low-rise condos, attached villas, and single-family homes in large HOA communities like Kings Point. Every window and door replacement in Tamarac, not just new construction, must carry a valid Florida Product Approval or Miami-Dade NOA rated for the local design wind speed. This rules out most big-box impact window lines approved only for the rest of the state.
Here is the local pattern that separates experienced Tamarac crews from newcomers: in aging condo associations, a single unit’s window swap can freeze the entire permit if the association’s master architectural standards specify a discontinued aluminum frame color or profile. Installers who skip the HOA spec-match step before submitting to Broward County Building often end up pulling permitted units and reordering product. We verify the HOA specification against available manufacturer lines before the permit application leaves our office.
Before
AfterOur Main Tamarac Services
Most calls from Tamarac homeowners center on two needs: replacing original windows that no longer pass inspection, and upgrading to impact-rated products that satisfy both code and association requirements. These three pages detail our most-requested services in this city.
Window Replacement in Tamarac
Window replacement in Tamarac means removing original single-pane aluminum jalousie or horizontal-slider units and installing Florida Product Approved or Miami-Dade NOA-rated replacements that satisfy Broward County HVHZ requirements. We work with HOA architectural committees in communities like Kings Point to confirm frame color and profile specifications before ordering, preventing the permit freezes that stall inexperienced crews. Every job begins with a measured survey you keep, and the written quote matches that document exactly. Window Replacement in Tamarac
Impact Windows & Doors in Tamarac
Impact windows and doors in Tamarac must carry a valid Florida Product Approval or Miami-Dade NOA rated for HVHZ wind loads; this is not optional for replacement work in this city. We specify PGT, CGI, and CWS lines by performance tier and price range, matching the product to the opening’s exposure and the HOA’s architectural requirements. The measured survey documents both the structural opening and the association specification, and the written quote cannot differ from that document. Impact Windows & Doors in Tamarac
Sliding & Patio Doors in Tamarac
Sliding and patio door replacement in Tamarac addresses the same 1970s-era aluminum units found in the city’s original condo and villa stock, now worn past weatherstripping repair and failing to meet current impact standards. We measure the rough opening, verify the HOA’s track-height and frame-color requirements, and specify Miami-Dade NOA-rated multi-panel systems from PGT or CWS that clear both permit gates. The photo record documents the installation sequence and the final weather seal. Sliding & Patio Doors in Tamarac
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Window Installation in Tamarac
Window installation in Tamarac means working with 1968-1982 concrete block construction, original single-pane aluminum frames, and HOA-governed communities that require written architectural committee approval before Broward County will issue a permit. The specific problem we solve is sequencing: verifying the HOA specification, matching it to a Florida Product Approved or Miami-Dade NOA-rated product line, and only then submitting the permit application. Window Installation crews who reverse that order routinely get stop-work orders in this city.
We see three failure patterns in Tamarac’s original windows: corroded aluminum frames that no longer seat weatherstripping, single-pane glass that provides no impact protection, and jalousie operators that have been obsolete for decades. None of these can be repaired to meet current HVHZ standards. Replacement is the only compliant path, and the product must be specified before the permit is filed.
Single & Double Hung Windows
Signs you need it
The sash won’t stay open, the balance spring is visible and rusted, or you can feel air movement around the closed sash in a Kings Point villa built in 1974.
What it costs in Tamarac
Single and double hung window installation in Tamarac typically runs $850-$1,400 per opening for vinyl-framed, non-impact units, and $1,600-$2,400 for Miami-Dade NOA-rated impact versions.
How we do it
We remove the old frame and sash, verify the rough opening against the measured survey, install the new unit with HVHZ-approved anchoring, seal with backer rod and sealant rated for the exposure, and photograph each step for the documented record.
Horizontal Roller Windows
Signs you need it
The roller carriage grinds, the sash jumps the track, or the single-pane glass rattles in the frame during afternoon thunderstorms.
What it costs in Tamarac
Horizontal roller window installation in Tamarac typically runs $900-$1,500 per opening for standard vinyl units, and $1,700-$2,600 for impact-rated versions with laminated glass.
How we do it
We extract the old roller assembly and frame, check the sill for the slope that prevents pooling, install the new unit with weep holes clear, and confirm smooth operation before sealing.
What Window Installation Costs in Tamarac
| Item | Typical range in Tamarac |
|---|---|
| Single / double hung, non-impact vinyl | $850 - $1,400 |
| Single / double hung, impact-rated | $1,600 - $2,400 |
| Horizontal roller, non-impact vinyl | $900 - $1,500 |
| Horizontal roller, impact-rated | $1,700 - $2,600 |
Do I need HOA approval before replacing windows in Tamarac?
Yes. Most Tamarac homes are in HOA-governed communities with written architectural standards that specify frame color, profile, and sometimes manufacturer. We obtain and verify those standards before ordering product; skipping this step is the leading cause of permit blocks and stop-work orders in this city. Call (754) 253-0713 to schedule your free estimate.
Can original 1970s aluminum windows be repaired instead of replaced?
No. Single-pane aluminum jalousie and horizontal-slider windows from Tamarac’s original buildout cannot be retrofitted to meet current HVHZ impact requirements. Replacement with a Florida Product Approved or Miami-Dade NOA-rated unit is the only compliant path. Call (754) 253-0713 for an exact quote - estimates are free.
Door Installation in Tamarac
Door installation in Tamarac presents the same dual-gate challenge as windows: the product must carry a Florida Product Approval or Miami-Dade NOA for HVHZ wind loads, and the installation must match the HOA’s written architectural standards for style, color, and hardware finish. The specific problem we solve is finding entry and patio door systems that satisfy both requirements without the reorder delays that stall permits in this city. Door Installation begins with a measured survey that documents the rough opening, the exposure direction, and the HOA specification.
Original doors in Tamarac’s 1968-1982 stock are typically hollow-core or thin steel units with single-pane sidelites, none of which meet current impact or energy codes. We replace them with Therma-Tru or CGI systems specified by performance tier and price range, not by margin.
Hurricane-Proof Front & Entry Doors
Signs you need it
The entry door flexes in the frame, the threshold gasket is crumbling, or the sidelite glass is single-pane and unprotected.
What it costs in Tamarac
Hurricane-proof front and entry door installation in Tamarac typically runs $2,200-$3,800 for a standard single door with impact-rated sidelites, and $4,000-$6,500 for double-door configurations with laminated glass.
How we do it
We remove the old unit and frame, verify the rough opening and king stud condition, install the pre-hung impact door with HVHZ-approved hardware and three-point locking, and seal with continuous bead sealant before photographing the assembly.
French & Double Doors
Signs you need it
The active door sags on the hinges, the astragal seal no longer compresses, or the glass is single-pane in a patio opening facing west exposure.
What it costs in Tamarac
French and double door installation in Tamarac typically runs $3,500-$5,500 for vinyl-framed units with impact-rated glass, and $5,500-$8,500 for aluminum-framed systems with thermal break and Miami-Dade NOA rating.
How we do it
We verify the header span and sill condition, install the frame plumb and level with composite shims, hang both doors to uniform reveal, adjust the multi-point hardware, and confirm the weatherstrip compression before sealing.
What Door Installation Costs in Tamarac
| Item | Typical range in Tamarac |
|---|---|
| Single entry door with impact sidelites | $2,200 - $3,800 |
| Double entry door, impact-rated | $4,000 - $6,500 |
| French / double patio door, vinyl frame | $3,500 - $5,500 |
| French / double patio door, aluminum thermal break | $5,500 - $8,500 |
Do entry doors in Tamarac need impact ratings too?
Yes. Every exterior door replacement in Tamarac must carry a Florida Product Approval or Miami-Dade NOA for HVHZ wind loads, not just windows. We specify Therma-Tru and CGI entry systems with documented ratings for this zone. Call (754) 253-0713 for an exact quote - estimates are free.
Can I change my door style if the HOA has rules?
Only within the HOA’s written architectural standards, which we obtain and verify before ordering. Some Tamarac associations specify exact slab styles, glass patterns, or paint colors; others allow variation within a defined range. We confirm the boundary before the permit application. Call (754) 253-0713 to schedule your free estimate.
Energy-Efficient Windows in Tamarac
Energy-efficient window installation in Tamarac addresses the specific penalty of 1970s single-pane aluminum construction: summer cooling loads that run continuously against uninsulated glass and frames that conduct heat directly into the conditioned space. The problem we solve is reducing that load with products that also satisfy HVHZ impact requirements, so the efficiency upgrade does not force a separate compliance conversation later. Energy-Efficient Windows from Sightline carry both the ENERGY STAR qualification and the Miami-Dade NOA or Florida Product Approval this city requires.
Tamarac’s original windows have no low-emissivity coating, no argon gas fill, and no thermal break in the frame. We replace them with insulated glass units that combine solar control with impact resistance, specified by U-factor and SHGC for the exposure.
Low-E & Argon Gas Glass
Signs you need it
The west-facing rooms in your Tamarac condo reach 85 degrees by 4 PM with the AC running, or you can feel radiant heat through the closed glass.
What it costs in Tamarac
Low-E and argon gas glass upgrade in Tamarac typically adds $120-$220 per opening to the base window price, with total installed cost running $980-$1,650 for vinyl-framed units and $1,750-$2,750 for impact-rated versions.
How we do it
We specify the low-E coating by climate zone and exposure, order the insulated glass unit with argon fill and warm-edge spacer, install it in a frame with thermal break, and document the NFRC label values in the photo record.
ENERGY STAR Replacement Windows
Signs you need it
Your FPL bill runs high through October despite thermostat discipline, or the original aluminum frames sweat condensation on humid mornings.
What it costs in Tamarac
ENERGY STAR replacement window installation in Tamarac typically runs $1,100-$1,800 per opening for non-impact vinyl units, and $1,850-$2,900 for impact-rated systems that carry both the ENERGY STAR label and Miami-Dade NOA.
How we do it
We measure the opening, specify the window by U-factor and SHGC for south Florida’s cooling-dominated climate, verify the ENERGY STAR qualification and Florida Product Approval, install with continuous air sealing, and leave the NFRC certificate with the measured survey.
What Energy-Efficient Windows Costs in Tamarac
| Item | Typical range in Tamarac |
|---|---|
| Low-E / argon upgrade, non-impact vinyl | $980 - $1,650 |
| Low-E / argon upgrade, impact-rated | $1,750 - $2,750 |
| ENERGY STAR replacement, non-impact vinyl | $1,100 - $1,800 |
| ENERGY STAR replacement, impact-rated | $1,850 - $2,900 |
Do energy-efficient windows also meet hurricane codes in Tamarac?
They must. In Tamarac’s HVHZ zone, every replacement window must carry a Florida Product Approval or Miami-Dade NOA regardless of efficiency claims. We specify products that carry both credentials, such as PGT and CWS lines with documented ratings. Call (754) 253-0713 for an exact quote - estimates are free.
Will new windows actually lower my FPL bill?
Yes, measurably. Replacing single-pane aluminum units with low-E, argon-filled insulated glass typically reduces cooling load by 15-25% in Tamarac’s 1968-1982 stock. The NFRC label on each window documents the U-factor and SHGC we used to calculate the improvement. Call (754) 253-0713 to schedule your free estimate.
Impact Garage Doors in Tamarac
Impact garage door installation in Tamarac is governed by the same HVHZ requirements as windows and entry doors, but with an additional structural consideration: the door is the largest opening in most homes, and the wind load transfers directly to the header and jambs. The problem we solve is specifying a Miami-Dade NOA-rated door system with the correct wind-load rating for the exposure and the verified structural attachment, then documenting that the installation matches the NOA’s fastening schedule. Impact Garage Doors from Sightline include this documentation as standard evidence.
Original garage doors in Tamarac’s 1970s stock are typically uninsulated, non-impact steel or wood panels with no wind-load rating. We replace them with rated systems that protect both the opening and the contents behind it.
Hurricane-Rated Garage Doors
Signs you need it
The existing door is uninsulated steel with no Miami-Dade NOA label, or the track is mounted to wood trim that has rotted at the jamb.
What it costs in Tamarac
Hurricane-rated garage door installation in Tamarac typically runs $1,800-$3,200 for a single 8-foot by 7-foot door with impact-rated panels, and $3,200-$5,500 for a double 16-foot by 7-foot system with reinforced track and hardware.
How we do it
We verify the header span and jamb material against the NOA’s structural requirements, remove the old door and track, install the new impact-rated system with the specified fasteners and bracing, test the spring balance and safety reverse, and photograph the label and attachment detail.
Wind-Load Code Compliance
Signs you need it
Broward County Building has flagged your garage door as non-compliant during a permit review for other work, or your insurance inspection noted the absence of a wind-load rating.
What it costs in Tamarac
Wind-load code compliance upgrade in Tamarac typically runs $2,200-$4,000 when structural reinforcement of the header or jambs is required, and $1,800-$3,200 for door-only replacement on structurally adequate openings.
How we do it
We inspect the header, jambs, and attachment points against the Miami-Dade NOA’s structural notes, reinforce or replace as specified, install the rated door with the exact fastener pattern and spacing, and leave the NOA documentation with the permit package.
What Impact Garage Doors Costs in Tamarac
| Item | Typical range in Tamarac |
|---|---|
| Single hurricane-rated garage door (8′ x 7′) | $1,800 - $3,200 |
| Double hurricane-rated garage door (16′ x 7′) | $3,200 - $5,500 |
| Wind-load compliance with structural reinforcement | $2,200 - $4,000 |
Does my garage door need a Miami-Dade NOA in Tamarac?
Yes. Every garage door replacement in Tamarac must carry a Miami-Dade NOA or Florida Product Approval rated for HVHZ wind loads. The NOA specifies not just the door but the track, hardware, and structural attachment; we install to that exact document. Call (754) 253-0713 for an exact quote - estimates are free.
Can I keep my garage door opener with a new impact door?
Sometimes. The opener must be compatible with the new door’s weight and spring balance, and the safety reverse must function correctly. We test and document opener operation during installation; if replacement is needed, we specify it in the written scope before work starts. Call (754) 253-0713 to schedule your free estimate.
Custom & Geometric Windows in Tamarac
Custom and geometric window installation in Tamarac solves a specific problem in the city’s 1970s HOA communities: original shaped windows, transoms, and accent units that have failed, where the association’s architectural standards require an exact profile match to maintain the building’s uniform appearance. The challenge is finding or fabricating a replacement that carries both the Miami-Dade NOA or Florida Product Approval this city requires and the dimensional precision to satisfy the HOA. Custom & Geometric Windows from Sightline include a measured survey with sightline dimensions you keep, and the written quote matches that document.
We see this most often in Tamarac’s villa and condo associations where arched transoms, octagonal accent windows, or radius-top units have corroded or lost their seal. Standard rectangular replacements are not permitted by these HOAs; the profile must be matched.
Geometric & Shaped Windows
Signs you need it
The arched transom above your front door has fogged between panes, or the octagonal accent window in your Kings Point villa has a cracked single-pane lite with no impact protection.
What it costs in Tamarac
Geometric and shaped window installation in Tamarac typically runs $1,400-$2,400 for standard polygon or radius-top units in non-impact vinyl, and $2,600-$4,200 for impact-rated custom shapes with laminated glass and Miami-Dade NOA.
How we do it
We measure the exact chord, rise, and sightline dimensions with a digital template, verify the HOA’s profile requirement against available manufacturer lines such as ViewLux or PGT custom programs, fabricate to those dimensions, and install with the same HVHZ anchoring and sealing as standard units.
Arched & Curved Windows
Signs you need it
The radius-top unit in your living room has separated at the mullion, or the curved eyebrow window above the garage has no Florida Product Approval and the association is requiring replacement.
What it costs in Tamarac
Arched and curved window installation in Tamarac typically runs $1,800-$3,000 for non-impact vinyl radius units, and $3,200-$5,000 for impact-rated arched systems with custom jamb fabrication and Miami-Dade NOA documentation.
How we do it
We create a digital radius template from the existing opening, specify the custom jamb and sash profile from a manufacturer with HVHZ-rated custom capability, verify the HOA color match, fabricate with warm-edge spacer and argon fill where specified, and install with continuous sealant and documented photo record.
What Custom & Geometric Windows Costs in Tamarac
| Item | Typical range in Tamarac |
|---|---|
| Geometric / shaped window, non-impact vinyl | $1,400 - $2,400 |
| Geometric / shaped window, impact-rated | $2,600 - $4,200 |
| Arched / curved window, non-impact vinyl | $1,800 - $3,000 |
| Arched / curved window, impact-rated | $3,200 - $5,000 |
Can HOA rules prevent me from changing a custom window shape?
Yes. Many Tamarac HOAs require exact profile preservation for geometric and arched units to maintain uniform building appearance. We obtain the association’s written standard and verify it against available custom manufacturer lines before fabricating. Call (754) 253-0713 for an exact quote - estimates are free.
How long does custom window fabrication take?
Typically 4-6 weeks from measured survey to delivery for custom geometric and arched units from PGT and ViewLux programs. We do not submit the permit until the fabrication is confirmed, preventing the delays that occur when permits expire before product arrives. Call (754) 253-0713 to schedule your free estimate.
Brands We Service in Tamarac
We install and service PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux product lines in Tamarac, specified by performance tier and price range rather than margin. Common hardware, balances, and weatherstrip for PGT and CGI are stocked locally for faster turnaround on repair calls. our brands
Pricing for Windows & Doors in Tamarac, FL
| Service | Typical range in Tamarac |
|---|---|
| Single / double hung window, non-impact vinyl | $850 - $1,400 |
| Single / double hung window, impact-rated | $1,600 - $2,400 |
| Horizontal roller window, non-impact vinyl | $900 - $1,500 |
| Horizontal roller window, impact-rated | $1,700 - $2,600 |
| Single entry door with impact sidelites | $2,200 - $3,800 |
| Double entry door, impact-rated | $4,000 - $6,500 |
| French / double patio door, vinyl frame | $3,500 - $5,500 |
| ENERGY STAR replacement, impact-rated | $1,850 - $2,900 |
| Single hurricane-rated garage door (8′ x 7′) | $1,800 - $3,200 |
| Double hurricane-rated garage door (16′ x 7′) | $3,200 - $5,500 |
| Geometric / shaped window, impact-rated | $2,600 - $4,200 |
| Arched / curved window, impact-rated | $3,200 - $5,000 |
Prices in Tamarac push toward the upper end when HOA specifications require discontinued or custom color matching, when structural reinforcement is needed for garage door headers, or when custom geometric fabrication is required. The written quote you receive before any work starts is the final invoice; Haven Clause 1 means the measurement and the price are the same document.
Neighborhoods We Serve in Tamarac
We install and replace windows and doors across Tamarac’s HOA-governed communities, from the original 1970s retirement villages to newer infill developments. Scheduling and dispatch are coordinated from our Miami office; crews serve Tamarac locally with measured surveys typically available within a few business days of your call.
- Kings Point
- Woodlands
- Tamarac Lakes
- Westwood
- Mainlands of Tamarac
Service Area - Cities Near Tamarac
We serve homeowners throughout Broward County and adjacent areas, with crews working regularly in Pompano Beach, FL, Oakland Park, FL, Deerfield Beach, FL, and Margate, FL. All locations fall within the same HVHZ requirements and similar HOA-governed housing stock; the measured survey and written quote process is identical across our service area.
Serving Tamarac, FL - Our Local Coverage Area
We’re based in the Tamarac area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Tamarac
Request the association’s written architectural standards before contacting any contractor. We obtain and verify those standards as the first step in our process, matching frame color, profile, and sometimes manufacturer before ordering product. This prevents the permit blocks and stop-work orders that occur when crews skip this step.
Yes. Every window and door replacement in Tamarac requires a Broward County building permit with Florida Product Approval or Miami-Dade NOA documentation. We pull the permit, schedule inspection, and pass the final before invoicing; the permit documentation is included in your job file.
Bring your HOA’s written architectural standards if you have them, any previous estimates you want reviewed under our Free Second Opinion policy, and a list of specific windows or doors that are failing. We will measure each opening, document the conditions, and leave you with a written scope and price that same visit.
Call (754) 253-0713 to schedule your free estimate. A live person answers, 24/7.
Six Reasons Homeowners Choose Sightline Windows & Doors Pompano Beach
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Pompano Beach Services
What Neighbors Say About Sightline Windows & Doors Pompano Beach
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Tamarac Customers Say
"Front door install went smoothly. Written warranty, clear price, no pressure to upgrade anything."
- Nils H."The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F."Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."
- Simone T.