New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Pompano Beach pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Window Installation: The Pompano Beach Owner’s Guide
CGI window installation in Pompano Beach typically runs $340-$780 per opening for replacement of existing impact-rated units, with most residential jobs completed in one working day. We stock CGI-compatible hardware, fasteners, and flashing systems on every truck, and we carry the full series catalog for same-day specification. Homeowners usually discover a problem when the sash won’t stay open, the lock doesn’t engage flush, or they feel air movement at the frame perimeter during a northeast wind off the Atlantic.
Which CGI Models This Applies To
CGI manufactures four residential window series that circulate in Pompano Beach: Estate Collection (aluminum impact), Sentinel (vinyl impact), Targa (high-rise commercial-grade), and Impact Resistant (builder-grade new construction). The part that fails depends on which series you have. Estate Collection uses a stainless-steel four-point locking system with a 7/8-inch throw bolt; Sentinel locks are nylon-reinforced with a shorter 5/8-inch throw and a different keeper spacing. Targa uses commercial-grade continuous hinges that do not interchange with residential hardware.
To identify your series, check the etched marking in the glass corner, usually reading “CGI” plus a four-digit code. The frame label, often hidden behind the sash stop, lists the manufacturing date and series abbreviation. We do not guess at Sightline; we pull the sash, photograph the label, and cross-reference against the 2023-2024 CGI parts matrix before ordering. Aftermarket hardware exists for Estate and Sentinel locks, but we spec OEM for Targa and Impact Resistant because the keeper tolerances are tighter and the liability exposure is higher. We are an independent service provider with no affiliation to CGI Windows, so we source from authorized distributors in Miami-Dade and maintain our own compatibility documentation.
Before
AfterSigns Your CGI Window Installation Is Failing
- Sash drift or won’t hold position. The balance system, either a coil spring or block-and-tackle depending on series year, has lost tension. In Pompano Beach’s salt-air environment, we’ve seen balance corrosion accelerate from ten-year expected life to six or seven.
- Lock tongue won’t extend fully or rattles. The cam or keeper has worn from repeated cycling, or the frame has settled and the keepers are no longer aligned. This is common in homes built during the 2015-2019 construction wave near the Intracoastal.
- Visible gap at the meeting rail when closed. The weatherstrip has compressed past recovery, or the interlock has bent from forced closure. CGI’s interlock design changed in 2019; pre- and post-change parts are not interchangeable.
- Condensation between panes. The insulating glass unit seal has failed. This is not a field-repairable condition; the entire IG unit must be fabricated to the measured daylight opening and re-glazed.
- Frame corrosion at the sill or jamb. Aluminum frames in Pompano Beach show pitting first where sprinkler spray hits repeatedly or where the weep holes are blocked by stucco overspray. The frame may still be structurally sound, but the thermal break can be compromised.
Replacement Cost & What’s Included
| Service | Price Range in Pompano Beach |
|---|---|
| CGI lock/keeper replacement (Estate/Sentinel) | $180-$290 |
| Balance system replacement, per sash | $220-$340 |
| IG unit replacement, fabricated to opening | $340-$580 |
| Full frame replacement, impact-rated CGI | $680-$1,240 per opening |
| Flash and seal remediation (corrosion repair) | $290-$520 |
The range reflects three variables: series (Estate parts cost more than Impact Resistant), access (second-story openings add ladder time), and whether the original installation used proper shimming and flashing or cut corners we’ll need to correct. Every quote is itemized: part number, labor hours, permit if required, and disposal. The written price you receive is the invoice price. Haven Clause 1. Our 365-Day Done Right Promise covers the installation and the part; if the lock fails or the IG fogs, we replace it and document the correction in your photo record.
DIY or Call Us?
There is no high-tension spring or electrical hazard in CGI window hardware, but there is a precision hazard. A homeowner can safely check the lock keeper alignment with a flashlight and confirm whether the weep holes are clear. What goes wrong in DIY is the measurement: a sash removed for “just a quick look” often reveals a frame out of square by 1/8 inch or more, and without a replacement strategy, the opening is left unsecured overnight. We’ve responded to three such calls in Pompano Beach this year alone, two after tropical moisture entered through the gap.
IG unit replacement is not a driveway project. The vacuum lift, the setting blocks, the capillary tube timing, and the structural silicone cure time all require controlled conditions. Sonia Raman won’t send a crew to fix a failed DIY attempt; she sends them to install it correctly the first time, with the measured survey you keep and the photo record we both have. Call (754) 253-0713 to schedule your free estimate.
FAQs
Aluminum impact frames typically last 25-30 years; vinyl 20-25. Hardware and seals are the wear items, with locks and balances often needing attention at year 8-12 in coastal zip codes due to salt-air corrosion. Call (754) 253-0713 for an exact assessment of your units; estimates are free.
No. Once the desiccant inside the spacer bar is saturated and visible condensation appears between panes, the seal is permanently compromised. The unit must be measured, fabricated, and re-glazed. We provide the measured survey and the written scope before any work begins.
Hardware swaps are 45-90 minutes per opening. Full frame replacement is 2-4 hours per unit, plus cure time for sealants. Most Pompano Beach residences are completed in one day for up to six openings. We do not promise same-day dispatch for planned installation work; we schedule, arrive on time, and document.
We stock Estate and Sentinel lock sets, common balance assemblies, and standard weatherstrip profiles. Series-specific or oversized IG units are ordered to measured specification with a 5-10 business day fabrication lead time from CGI’s Miami-Dade distributor. We confirm availability before scheduling.
Written by Sonia Raman, Owner, Sightline Windows & Doors Pompano Beach at Sightline Windows & Doors Pompano Beach, serving Pompano Beach and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Pompano Beach
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Pompano Beach Services
