New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Pompano Beach pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ECO Window Systems Sliding & Patio Doors: The Pompano Beach Owner’s Guide
We stock and install ECO Window Systems sliding and patio door assemblies and replacement hardware for Pompano Beach homes, with most completed installations in the $1,850-$3,400 range depending on size, impact rating, and whether the frame is being replaced or just the panel and hardware. Most ECO Window Systems parts we carry on our trucks, and we can usually survey and quote within 48 hours of your call. You’ll know the part has failed when the panel sticks in the track, the lock no longer seats flush, or you feel a draft along the sill even when the door is closed - these symptoms creep up after five to seven years of salt-air exposure in Pompano Beach’s coastal climate.
Which ECO Window Systems Models This Applies To
ECO Window Systems produces several sliding and patio door series, and the parts are not interchangeable across all of them. The most common we see in Pompano Beach are the ECO 5000 Series (standard vinyl sliding door), ECO 8000 Series (impact-rated with laminated glass), and the ECO Elite Patio Door (aluminum-clad with thermally broken frame). The series number is stamped on the hinge-side jamb or on a metal label inside the top track; if that label is corroded, measure the visible glass width and the overall frame depth - 2¼ inch frame depth indicates the 5000 Series, while 2⅞ inch with a thermal break points to the 8000 or Elite.
We carry OEM ECO Window Systems rollers, locks, and weatherstripping, and we also stock quality aftermarket equivalents where the OEM part has been discontinued or where the aftermarket version solves a known failure point. The 5000 Series roller, for example, uses a 1¼-inch nylon wheel that flat-spots in high-humidity environments; we stock a sealed-bearing stainless alternative that lasts roughly twice as long in Pompano Beach conditions. Sightline Windows & Doors Pompano Beach is an independent service provider, not affiliated with ECO Window Systems.
Before
AfterSigns Your ECO Window Systems Sliding & Patio Doors Is Failing
- The panel drags or requires shoulder force to move. This usually means the roller assembly has seized or the axle has bent. In Pompano Beach, salt accumulation in the bottom track accelerates corrosion of the roller axle, and we see this most often on east-facing doors within a half-mile of the Intracoastal.
- The lock thumb-turn rotates but the bolt doesn’t engage. The internal linkage in ECO Window Systems mortise locks uses a zinc alloy that fatigues after repeated cycling. Once the cam cracks, the lock is decorative only - a security issue, not just an annoyance.
- Visible daylight or air movement at the center stile when closed. The interlock weatherstrip compresses permanently over time, or the panel has dropped on worn rollers and no longer meets flush. We check this with a smoke pencil during survey; anything more than a faint wisp means the seal is compromised.
- Condensation between the glass panes. The insulated glass unit (IGU) seal has failed. ECO Window Systems units from 2015-2019 used a dual-seal system that held up well inland but showed higher failure rates within three miles of salt water; replacement requires ordering a new IGU to the exact sightline measurement.
- The track itself is gouged or the panel jumps the rail. This is past the point of hardware replacement. The bottom track or the header guide is damaged, often from a roller that disintegrated and let the panel ride metal-on-metal.
Replacement Cost & What’s Included
| Scope | Typical Range in Pompano Beach |
|---|---|
| Roller assembly replacement (both panels) | $280-$420 |
| Mortise lock and handle set | $340-$490 |
| Weatherstrip replacement (full perimeter) | $190-$310 |
| Insulated glass unit (IGU) replacement | $580-$940 per panel |
| Full panel and frame replacement | $1,850-$3,400 |
What drives the range: size (standard 6-foot slider versus 12-foot multi-panel wall), impact rating (non-impact, HVHZ, or Miami-Dade NOA), and whether the existing frame is square and sound. Every quote we write breaks out parts, labor, and permit fees separately - Haven Clause 1 - and the price on the measured survey is the price on the invoice. No change orders. The 365-Day Done Right Promise covers the installation and hardware; IGU replacements carry the manufacturer’s glass warranty, which we document in your photo record.
DIY or Call Us?
There is one thing every ECO Window Systems owner can safely check: remove the bottom track cover (usually a snap-in vinyl strip) and vacuum out sand and salt buildup. If the roller wheels are visible and turn freely by hand, they may just need cleaning. Beyond that, we recommend against self-service.
Sliding door panels weigh 80 to 140 pounds depending on glass thickness, and lifting one to access rollers risks back injury and glass breakage. The mortise lock interfaces with a multi-point system; installing it incorrectly can leave the door secured only at the handle, with the top and bottom bolts non-functional. And any work on an impact-rated unit that disturbs the glazing bead or frame seal technically voids the product’s Miami-Dade approval. We background-check and license-number our crews for a reason - Haven Clause 3 - and we document the condition before and after with photos you keep. Call (754) 253-0713 to schedule your free estimate.
FAQs
Rollers and locks typically last five to seven years in coastal Pompano Beach conditions, with units within a mile of the water trending toward the shorter end. We see IGUs hold ten to fifteen years inland, but six to ten years near the Intracoastal or oceanfront. Call (754) 253-0713 and we’ll assess what’s actually worn on your door - estimates are free.
A seized roller can sometimes be cleaned and re-lubricated, but the axle corrosion that caused it usually returns within a year. Mortise locks and failed IGUs cannot be repaired to manufacturer spec; replacement is the only code-compliant fix. We stock the common ECO Window Systems hardware on our trucks, so the swap is usually one visit. Call (754) 253-0713 for an exact quote - estimates are free.
Hardware replacement (rollers, lock, weatherstrip) takes two to three hours on site. A full panel and frame replacement is a full day, plus permit and inspection time if it’s an impact-rated unit - Pompano Beach Building Department requires a final inspection for any HVHZ-rated door replacement. We pull the permit and schedule the inspection as part of our scope; it’s included in your written quote. Call (754) 253-0713 to schedule your free estimate.
We stock rollers, locks, handles, and weatherstrip for the 5000, 8000, and Elite series on our Pompano Beach trucks. IGUs and full panels are ordered to your exact sightline measurement after our survey - we don’t guess on glass size. Measure once, document it, then cut. Call (754) 253-0713 to schedule your free estimate.
Written by Sonia Raman, Owner, Sightline Windows & Doors Pompano Beach at Sightline Windows & Doors Pompano Beach, serving Pompano Beach and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Pompano Beach
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Pompano Beach Services
