Mr-Glass Sliding & Patio Doors Nationwide | Sightline Windows & Doors Pompano Beach

Mr-Glass Sliding & Patio Doors: The Pompano Beach Owner’s Guide

We stock and install Mr-Glass-compatible sliding and patio door systems in Pompano Beach, with typical installed pricing from $1,800 to $4,200 depending on series, size, and impact rating. Most Mr-Glass replacement units are available same-day through our verified supplier network, and we carry common rollers, tracks, and handle sets on every truck. Homeowners usually discover a problem when the door sticks in the humidity of a Pompano Beach summer, when rollers grind flat against the track, or when the locking mechanism quits engaging after years of salt-air exposure near the Intracoastal.

Call (754) 253-0713

Which Mr-Glass Models This Applies To

Mr-Glass produces sliding and patio door systems across several series, and matching the right replacement part starts with the etched label on the glass itself or the sticker on the frame edge. We most commonly service the MG-5000 and MG-7000 series in Pompano Beach homes, with the MG-7000 being the impact-rated line required for HVHZ (High Velocity Hurricane Zone) compliance in eastern Broward County. The MG-5000 uses a 1.75-inch frame depth with a standard dual-wheel roller assembly; the MG-7000 steps up to a 2.25-inch frame and a heavier-duty stainless-steel roller rated for the additional sash weight of laminated impact glass.

To identify your series: check the spacer bar between glass panes for the Mr-Glass logo and series code, or measure the frame depth from interior to exterior at the jamb. The OEM roller for the MG-5000 is part number MGR-5000-R, while the MG-7000 takes MGR-7000-R; we stock both and also carry a verified aftermarket equivalent by C.R. Laurence that meets the same load rating at roughly 15 percent less cost. One compatibility gotcha: the MG-7000 track profile changed slightly in 2019, so pre-2019 units need the legacy track cap (MGT-7000-L) rather than the current part. We verify this on-site with a track gauge before ordering.

Before

After

Signs Your Mr-Glass Sliding & Patio Door Is Failing

• The door requires shoulder pressure to move. This usually means the rollers have flattened or the bearings have seized, common after 5-7 years in Pompano Beach’s salt-air environment. The MG-5000’s standard nylon rollers degrade faster near the coast than inland; we see this pattern regularly in homes east of Federal Highway.
• Grinding or squealing from the bottom track. Metal-on-metal contact means the roller housing has cracked or the axle has shifted. Continuing to force the door will chew into the aluminum track itself, turning a $180 roller replacement into a $600 track-and-roller job.
• The lock tongue won’t extend fully or catches halfway. The multipoint locking mechanism in Mr-Glass doors depends on precise frame alignment; settlement, humidity swelling in the sill, or corrosion in the keeper can throw off the strike point. We measure the engagement depth with a feeler gauge to determine if it’s the lock, the keeper, or frame racking.
• Visible daylight or water intrusion at the sill. The interlocking weatherstrip at the center meeting stile compresses over time, and the sill track drain holes in Mr-Glass units are small enough to clog with Pompano Beach’s fine sand and organic debris. We clear the weep system and replace the pile weatherstrip as standard practice on every service call.
• Fog between the glass panes. The insulated glass unit (IGU) has lost its seal. Mr-Glass IGUs carry a 10-year warranty from manufacture date; we verify eligibility and can order a direct replacement or upgrade to a lower-SHGC glass package if the original unit faces west and overheats the room.

Replacement Cost & What’s Included

What drives the range: frame size, impact rating, finish color (white is standard; bronze and tan carry a 10-15 percent premium), and whether the rough opening needs reframing. Every quote we write in Pompano Beach includes the measured survey you keep, the written scope of work, parts, labor, disposal, and the 365-Day Done Right Promise under Haven Clause 5 (No Surprises). The price on the page is the price on the invoice. We pull permits when required by Broward County and pass all inspections; the permit cost is listed as a line item, not buried in overhead.

DIY or Call Us?

An owner can safely check three things: whether the track is clear of debris, whether the weep holes are open, and whether the lock keeper screws have loosened. Beyond that, Mr-Glass sliding doors present real hazards for DIY. The MG-7000 impact-rated sash weighs 180-220 pounds depending on size; removing it without proper supports risks injury and frame damage. The multipoint lock mechanism is under spring tension, and incorrect reassembly can leave the door unsecured or inoperable. We carry the specialty tools to set roller height without stripping the adjustment screws, which is the most common DIY mistake we correct in Pompano Beach. Measure once, document it, then cut - that’s how we work, and it’s why we photograph every adjustment for your record. Call (754) 253-0713 and we’ll schedule a free estimate with the written price before any work starts.

FAQs