New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Pompano Beach pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Impact Windows & Doors Across Sunrise
Impact window and door replacement in Sunrise runs $800-$1,500 per opening for standard sizes, with whole-home packages typically starting around $8,000. Because Sunrise sits entirely within Broward County’s High Velocity Hurricane Zone, every replacement unit must carry a Miami-Dade Notice of Acceptance or Florida Product Approval, a stricter standard than neighboring Palm Beach County cities just to the north. Our Impact Windows & Doors team coordinates scheduling from our South Florida office and serves Sunrise directly, with crews familiar with the city’s 1970s planned-community landscape and its unique dual-approval process through both the building department and HOA review boards.
Call (754) 253-0713 to schedule your free measured survey and written estimate. We bring the price in writing before any work starts, and the quote you sign is the invoice you pay.
Why Sightline Windows & Doors Pompano Beach Is Sunrise’s Preferred Impact Windows & Doors Company
We’ve installed impact-rated units across Sunrise since 2012, from the original CBS ranch homes in Sunrise Golf Village to the garden condominiums along Oakland Park Boulevard. Our crews know what opening a 1970s wall in this city actually turns up: painted-over jalousie frames fused to concrete block, undersized headers over sliding glass doors, and threshold seals that have leaked through forty years of Broward’s 60-plus inches of annual rainfall.
Sunrise customers find us through three-star reviews and detailed write-ups, the kind left by homeowners who checked our license numbers before we arrived. Our 365-Day Done Right Promise is written into the Haven Standard on every job, not offered as a courtesy after the fact. Calls to (754) 253-0713 are answered by a live person, 24/7, and our background-checked, uniformed technicians arrive with license numbers visible and a measured survey document the customer keeps.
Dispatch and scheduling are coordinated from our Miami office, but the crew that pulls your permit at the Broward County building department and submits your HOA architectural package is the same crew that measures, installs, and documents the finished opening.
Before
AfterOur Impact Windows & Doors Services in Sunrise
Hurricane Impact Windows
Hurricane impact windows in Sunrise are not optional; they are legally required for any permitted replacement because the city falls within the wind-borne debris design zone despite sitting 10-12 miles inland. We specify units from CGI, CWS, and ES Windows with design pressures matched to each opening’s exposure, height, and surrounding structure. Every unit carries the Miami-Dade NOA or Florida Product Approval the Broward inspector will ask for at rough and final inspection.
Wind Mitigation & HVHZ Code Compliance
Wind mitigation in Sunrise means more than impact glass. It means documenting the opening protection, the fastening schedule, and the product approval numbers that your insurer will review for premium credit. We handle the HVHZ compliance documentation as part of every job, including the wind-mitigation inspection form that carriers require for the roughly 25% windstorm-premium reduction. Our written scope includes the specific NOA numbers and design pressure ratings for your records.
Horizontal Roller & Sliding Impact Windows
Horizontal roller and sliding impact windows are the direct replacement for the original aluminum sliders found in most 1970s-80s Sunrise tract homes. These openings are where we most often find failed waterproofing: decades of wind-driven rain have rotted the sill plate and subfloor behind the threshold seal. We inspect for this damage during our measured survey and write an allowance into the contract before the wall opens, so any necessary reframing and waterproofing rebuild is priced and approved in writing before we set the new unit.
Single Hung Impact Windows
Single hung impact windows suit the smaller bedroom and bathroom openings common in Sunrise’s CBS ranch floor plans. We source these from ECO Window Systems and CWS in frame profiles and finishes that match original HOA-mandated specifications, including bronze and mill-finish aluminum that satisfies both the building department and the architectural review board.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sunrise
We specify from eight manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - chosen by what the opening requires, not by what sits in a warehouse. For Sunrise’s dual-approval market, we lean on CGI and CWS for their range of HVHZ-approved finishes, and ES Windows for custom color matching to 1970s HOA covenants. Local parts availability means we don’t fabricate excuses when a bronze-finish unit needs to match a submittal already in review.
Common Impact Windows & Doors Problems We See in Sunrise Homes
- Painted-over jalousie frames fused to CBS block. These original 1960s-80s units don’t unscrew; they chip out. Behind them we regularly find undersized or rotted headers that must be reframed before the new impact unit can carry its design load.
- Slider threshold seals and frame corners compromised by decades of convective storm exposure. Broward’s violent afternoon storms drive wind-loaded rain directly into these weak points, and by the time the homeowner notices interior damage, the sill plate and subfloor have already rotted.
- Out-of-code aluminum branch wiring in the same wall cavity as the window opening. The window replacement itself doesn’t trigger a full electrical upgrade, but the inspector won’t sign off with exposed hazards, so we price the correction in writing before closing the wall.
- HOA rejection of standard white vinyl units that pass the building department but violate 1970s covenant language. We source the specific bronze or mill-finish aluminum profiles from the start, submitting to both authorities simultaneously so the job doesn’t stall on a second architectural review cycle.
Pricing for Impact Windows & Doors in Sunrise, FL
A typical impact window replacement in Sunrise runs $800-$1,500 per opening installed, with single-hung units in the $900-$1,800 range depending on frame material and design pressure rating. Large or custom openings - picture windows, sliding glass door conversions, geometric shapes - move into the $2,500-$5,000 range. Whole-home packages for the 1,400-2,000 square foot CBS ranches common in Sunrise generally start around $8,000 and can reach $25,000 or more with extensive reframing, waterproofing rebuilds, and electrical corrections.
What moves the price in this market: the condition of the rough opening once the original unit comes out, the need for HOA-matched finishes, floor height and exposure affecting design pressure requirements, and whether the permit inspection exposes additional code issues. We build allowances for known risks into the written contract, and anything unexpected is priced and approved in writing before we proceed. No change order appears without the homeowner’s signature.
Call (754) 253-0713 for your free measured survey and written estimate.
What Impact Windows & Doors Costs in Sunrise
| Opening Type | Typical Range in Sunrise |
|---|---|
| Standard impact window (fixed or single-hung) | $800 - $1,500 |
| Impact single-hung, mid-range frame | $900 - $1,800 |
| Horizontal roller or sliding replacement | $1,200 - $2,200 |
| Large picture window or sliding glass door | $2,500 - $5,000 |
| Whole-home package (typical 3/2 CBS ranch) | $8,000 - $25,000+ |
These ranges reflect installed cost including the unit, HVHZ-compliant fastening, permit, and standard trim. They do not include structural reframing, waterproofing rebuild, or electrical corrections, which we allow for separately in writing based on what we find during the measured survey. The survey itself is free, and the written quote you receive is the document we work from - Haven Clause 1, Have it in writing.
Florida Pays You Back
Impact window and door upgrades in Sunrise qualify for several incentive programs, though final eligibility rests with the program administrator or your carrier. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation improvements. Impact-resistant windows and doors are exempt from Florida sales tax. The federal 25C energy credit provides 30% of product cost, up to $600 per year, on qualifying energy-efficient units. After installation and a wind-mitigation inspection ($75-$150), most carriers apply a credit averaging around 25% on the windstorm portion of the premium. We document the product approval numbers, U-factor, and SHGC values your tax preparer and insurer will need.
Impact Windows vs. Hurricane Shutters: The Permanent Difference
Impact windows are permanent protection; there are no panels to store, track, or hang when a storm approaches. In Sunrise’s 1970s planned communities with limited garage storage and strict exterior appearance rules, this matters. Shutters require annual inspection, hardware maintenance, and physical deployment under time pressure. Impact units are always in place, always rated, and always documented for your wind-mitigation inspection. We do not install or sell hurricane shutters; we install impact-rated glazing that removes the deployment variable entirely.
We Also Serve Cities Near Sunrise
Our crews work throughout Broward and northern Miami-Dade, including Sunrise, Pompano Beach, Oakland Park, Deerfield Beach, and Margate. Each city carries its own wind-zone and code nuances; we pull permits and match product approvals to the specific jurisdiction, not to a generic South Florida specification.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Sunrise
Sunrise falls entirely within Broward County’s High Velocity Hurricane Zone, which mandates Miami-Dade NOA or Florida Product Approval for every permitted window and door replacement regardless of quantity. Palm Beach County cities north of the Broward line are not in the HVHZ, so their building departments accept a broader range of product approvals. We verify the correct approval path before ordering any unit for your job. Call (754) 253-0713 and we’ll confirm the exact documentation your permit requires.
We regularly find painted-over frames fused to the concrete block, undersized or rotted headers, and failed waterproofing that has compromised the sill plate and subfloor. In some openings we also find out-of-code aluminum branch wiring in the same cavity. We inspect for visible signs during our measured survey and write allowances into the contract for the most likely corrections, then price any surprises in writing before proceeding. Call (754) 253-0713 to schedule the survey.
Yes, frequently. Many Sunrise planned communities developed in the 1970s maintain covenant language requiring replacement windows to match the original frame color and profile. A standard white vinyl unit may pass the Broward building department but fail the HOA architectural review. We source HVHZ-approved impact units in specific bronze or mill-finish aluminum from the start, submitting to both authorities simultaneously to avoid a second review cycle. Call (754) 253-0713 and we’ll review your HOA’s requirements during the estimate.
Impact windows with low U-factor and SHGC ratings typically reduce cooling load in Broward’s climate, though savings vary with home size, shading, and existing system efficiency. Insurers do not credit the energy performance directly; they credit the wind-mitigation inspection showing impact-rated opening protection, which most carriers apply as roughly a 25% reduction on the windstorm premium. We document the ratings and provide the inspection-ready paperwork. Call (754) 253-0713 for a written estimate that includes your unit’s specific performance numbers.
No, the window permit itself does not trigger a full electrical code upgrade. However, the inspector will not sign off on the final if exposed wiring in the same cavity presents a visible hazard. We price any necessary electrical correction in writing as a separate allowance, approved by you before we close the wall. Nothing moves without your signature. Call (754) 253-0713 to discuss how we handle opening-up surprises under the Haven Standard.
Ready for your free measured survey and written estimate? Call (754) 253-0713. Our live answer staff is available 24/7, and our background-checked, uniformed technicians serve Sunrise with the documented photo records and written warranties that come standard on every job under the Haven Standard.
Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Sunrise since 2012 under the Haven Standard.
Six Reasons Homeowners Choose Sightline Windows & Doors Pompano Beach
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Pompano Beach Services
What Neighbors Say About Sightline Windows & Doors Pompano Beach