New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Pompano Beach pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Windows & Doors in Sunrise, FL
Window installation in Sunrise typically runs $650-$1,400 per opening for standard vinyl or aluminum units, with impact-rated replacements starting around $1,200 due to the city’s High Velocity Hurricane Zone requirements. Most Sunrise homes were built between the 1960s and 1980s with original jalousie panels and single-pane aluminum sliders that no longer meet code, making full-frame replacement the norm rather than the exception. We’re Sightline Windows & Doors, and we measure every opening to the sixteenth before writing the price - call (754) 253-0713 to schedule your free measured survey.
Why Sunrise Homes Are Different
Sunrise sits entirely inside Broward County’s High Velocity Hurricane Zone, which means every replacement window and door must carry a Miami-Dade Notice of Acceptance or Florida Product Approval - a stricter standard than Palm Beach County cities just to the north. The city’s housing stock is overwhelmingly 1970s-80s CBS tract homes with original aluminum-frame jalousie, awning, and horizontal sliding windows that predate the 1994 post-Andrew code changes and the 2002 Florida Building Code HVHZ rules. These painted-over frames are set in concrete block, not wood, so removal takes longer and the rough opening requires more prep work than in frame-construction markets.
Broward’s 60+ inches of annual rainfall, delivered in violent afternoon convective storms, drives wind-loaded rain into aging threshold seals and frame corners on sliding glass doors - a chronic infiltration point we see repeatedly in Sunrise’s garden condominiums and ranch homes. Many of the city’s planned communities, developed under 1970s HOA covenants, require replacement units to match original frame color and profile, so contractors must source HVHZ-approved impact windows in specific bronze or mill-finish aluminum to satisfy both the building department and the HOA review board. That dual-approval hurdle catches out-of-area companies who don’t stock the right finishes.
Before
AfterOur Main Sunrise Services
Most Sunrise homeowners who call us start with one of these two projects, though we handle the full range of opening work across the city.
Window Replacement in Sunrise
We replace original jalousie and single-pane aluminum units in Sunrise’s CBS ranch homes and low-rise condos with HVHZ-compliant impact or energy-efficient windows, matching HOA-required profiles where needed. Every job begins with a measured survey you keep, and the written quote is the same document we use at installation. Window Replacement in Sunrise covers our full process for full-frame and retrofit applications.
Impact Windows & Doors in Sunrise
Because Sunrise falls within the wind-borne debris design zone, impact glazing is legally required for any permitted replacement, not optional. We specify PGT, CGI, and CWS lines by performance tier and price range, pulling permits that list the exact NOA numbers for inspection. Impact Windows & Doors in Sunrise details our HVHZ-compliant product selection and documentation.
Sliding & Patio Doors in Sunrise
Sliding glass doors in 1970s-80s Sunrise homes suffer from corroded rollers, failed weatherstripping, and threshold seal rot caused by wind-driven rain infiltration. We replace these with impact-rated multi-panel systems that include proper sill pan flashing for CBS block openings. Sliding & Patio Doors in Sunrise explains our threshold detail and drainage approach.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Window Installation in Sunrise
Window installation in Sunrise means working with concrete block construction, painted-over aluminum frames from the 1970s and 1980s, and the strictest hurricane product approval standards in the state. The original openings in Sunrise’s CBS tract homes and garden condos were never designed for modern impact-rated units, so we routinely encounter rough openings that need block cutting, lentil modification, or stucco repair before the new window can be set. Our Window Installation process starts with the measured survey you keep and ends with a documented photo record under the Haven Standard.
Single & Double Hung Windows
Signs you need it
Original single-pane aluminum hung windows that won’t stay open, show condensation between panes, or have corroded balances and broken tilt latches are standard in Sunrise’s 1970s ranch homes.
What it costs in Sunrise
Single and double hung window installation in Sunrise typically ranges from $650-$1,200 per opening for vinyl units and $850-$1,400 for aluminum impact-rated replacements.
How we do it
We remove the painted-over aluminum frame from the CBS block opening, repair stucco damage, install a flanged replacement unit with proper sill pan drainage, and seal with backer rod and urethane to prevent wind-driven rain infiltration.
Horizontal Roller Windows
Signs you need it
Roller windows that jam in their tracks, show daylight around the sash, or have cracked single-pane glass are common failure points in Sunrise’s original 1980s sliding installations.
What it costs in Sunrise
Horizontal roller window installation in Sunrise typically ranges from $700-$1,300 per opening for standard units and $900-$1,500 for impact-rated replacements with HVHZ-approved glazing.
How we do it
We extract the old roller assembly and frame, verify the rough opening is square in the CBS block, set the new unit on composite shims for proper drainage slope, and secure through the jamb into block with Tapcon fasteners at specified intervals.
What Window Installation Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Single/Double Hung (vinyl, standard) | $650 - $1,200 |
| Single/Double Hung (aluminum, impact-rated) | $850 - $1,400 |
| Horizontal Roller (standard) | $700 - $1,300 |
| Horizontal Roller (impact-rated) | $900 - $1,500 |
How long does window installation take in Sunrise?
Most single-opening replacements in Sunrise take 2-4 hours, with full-home jobs of 15-25 openings typically completed in 2-3 days. CBS block construction and stucco repair add time compared to wood-frame markets. Call (754) 253-0713 for a written timeline with your estimate.
Do you pull permits for window installation in Sunrise?
Yes - Sunrise requires permits for every window replacement, and we pull them as standard practice, listing the exact Miami-Dade NOA or Florida Product Approval number for each unit. The permit, inspection, and documentation are included in your written scope, not added later. Call (754) 253-0713 to review the permit process for your project.
Door Installation in Sunrise
Door installation in Sunrise means replacing original 1970s-80s entry units that were never impact-rated and often lack proper flashing in CBS block openings, while navigating HOA color-matching requirements in planned communities like Welleby and Sunrise Lakes. The combination of HVHZ code compliance and architectural review board approval creates a dual hurdle that out-of-area installers frequently miss. Our Door Installation service specifies every product by NOA number and finish before ordering.
Entry Doors
Signs you need it
Steel entry doors with rust at the threshold, delaminated fiberglass skins, or single-pane decorative glass that isn’t impact-rated are common pre-1990s conditions in Sunrise homes.
What it costs in Sunrise
Entry door installation in Sunrise typically ranges from $1,200-$2,500 for standard fiberglass or steel units and $2,000-$4,500 for impact-rated systems with HVHZ-approved glazing and hardware.
How we do it
We remove the old unit and verify the CBS block rough opening is plumb, install a pre-hung door with composite jamb and adjustable threshold, apply peel-and-stick membrane flashing integrated with the weather-resistive barrier, and adjust strike and sweep for proper seal compression.
Hurricane-Proof Front & Entry Doors
Signs you need it
Any permitted door replacement in Sunrise requires HVHZ-approved impact resistance, so original decorative glass inserts, sidelights, and transoms without proper ratings must be upgraded.
What it costs in Sunrise
Hurricane-proof front and entry door installation in Sunrise typically ranges from $2,500-$4,500 for standard sizes and $3,500-$6,500 for oversized or custom-configured units with decorative impact glass.
How we do it
We specify Therma-Tru or CGI impact-rated door systems with documented NOA numbers, coordinate the HOA color and profile approval where required, and install with continuous sill pan and jamb flashing tied into the existing WRB for wind-driven rain protection.
What Door Installation Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Entry Door (fiberglass/steel, standard) | $1,200 - $2,500 |
| Entry Door (impact-rated) | $2,000 - $4,500 |
| Hurricane-Proof Front Door (standard size) | $2,500 - $4,500 |
| Hurricane-Proof Front Door (oversized/custom) | $3,500 - $6,500 |
Do I need HOA approval before replacing my door in Sunrise?
Yes - most Sunrise planned communities require architectural review board approval for entry door changes, including color, profile, and glass style. We provide product cut sheets and finish samples for your submittal. Call (754) 253-0713 and we’ll coordinate the documentation.
What’s included in your door installation quote?
Our written quote includes the measured survey, the door unit with specified NOA number, permit and inspection fees, removal and disposal, stucco repair, and the documented photo record - the same document from measurement to invoice. Call (754) 253-0713 for your written price.
Energy-Efficient Windows in Sunrise
Energy-efficient windows in Sunrise address the specific penalty of single-pane aluminum originals in a climate where air conditioning runs eight months a year and afternoon thunderstorms drive humidity against every frame corner. The 1970s-80s housing stock here was built before U-factor and SHGC ratings existed as purchase criteria, so replacement offers measurable utility reduction that we document with product spec sheets. Our Energy-Efficient Windows service specifies performance values in writing before you order.
Low-E & Argon Gas Glass
Signs you need it
Rooms with south or west exposure that overheat by mid-afternoon, or windows where you can feel radiant heat through the glass, indicate failed or missing low-E coating on original single-pane units.
What it costs in Sunrise
Low-E and argon gas glass packages in Sunrise typically add $75-$150 per opening to the base window cost, with total installed units ranging from $725-$1,350 for standard sizes.
How we do it
We specify the low-E coating by emissivity value and SHGC rating for your orientation, fill with argon to 90%+ concentration at sea level, and verify the spacer system is warm-edge technology to reduce thermal bridging at the glass perimeter.
ENERGY STAR Replacement Windows
Signs you need it
Windows without the NFRC label or with U-factors above 0.40 in Sunrise’s cooling-dominated climate are costing measurable money in HVAC runtime every month.
What it costs in Sunrise
ENERGY STAR certified replacement windows in Sunrise typically range from $800-$1,500 per opening for vinyl frames and $1,000-$1,800 for thermally-broken aluminum impact-rated units.
How we do it
We select from our PGT, CWS, and ECO Window Systems lines by certified U-factor and SHGC values, document the NFRC label numbers in your written scope, and install with proper air sealing to achieve the rated performance rather than the product-only spec.
What Energy-Efficient Windows Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Low-E/Argon upgrade (add to base window) | $75 - $150 per opening |
| Low-E/Argon window (total installed) | $725 - $1,350 |
| ENERGY STAR Vinyl Window | $800 - $1,500 |
| ENERGY STAR Aluminum Impact Window | $1,000 - $1,800 |
Will energy-efficient windows lower my FPL bill in Sunrise?
Most Sunrise homeowners see measurable cooling load reduction, with payback periods of 5-8 years depending on original window condition, home orientation, and HVAC efficiency. We document the U-factor and SHGC values in writing so you can calculate your specific savings. Call (754) 253-0713 for performance specs on any unit.
Do energy-efficient windows also meet hurricane code in Sunrise?
Yes - our ENERGY STAR impact-rated units from PGT, CWS, and ECO carry both NFRC energy ratings and Miami-Dade NOA numbers, satisfying both the energy and HVHZ requirements in one product. Call (754) 253-0713 to review dual-certified options for your openings.
Impact Garage Doors in Sunrise
Impact garage doors in Sunrise are required for any permitted replacement because the entire city falls within Broward County’s High Velocity Hurricane Zone, yet many original 1970s-80s garage doors are uninsulated, non-impact steel or wood panels that fail both structurally and thermally. The large surface area of a garage door makes it particularly vulnerable to wind-borne debris penetration, and a failed garage door pressurizes the entire home envelope. Our Impact Garage Doors service specifies wind-load ratings and tracks the permit through final inspection.
Hurricane-Rated Garage Doors
Signs you need it
Original garage doors with no wind-load sticker, visible rust at panel seams, or operation that binds in the track indicate a pre-HVHZ unit that cannot pass inspection for replacement.
What it costs in Sunrise
Hurricane-rated garage door installation in Sunrise typically ranges from $1,800-$3,500 for single-car openings and $2,800-$5,500 for double-car doors, depending on insulation level and window configuration.
How we do it
We verify the wind-load requirement for your specific Broward County zone, specify the door and track system with documented Miami-Dade NOA, and install with proper jamb framing and header reinforcement to transfer wind loads to the CBS structure.
Wind-Load Code Compliance
Signs you need it
Any garage door replacement permit in Sunrise requires demonstration of compliance with the Florida Building Code wind-load provisions, which most pre-2002 installations cannot meet.
What it costs in Sunrise
Wind-load code compliance upgrades for garage doors in Sunrise typically range from $2,200-$4,000 when structural reinforcement of the CBS header or jambs is required, and $1,800-$3,500 for direct replacement with compliant hardware.
How we do it
We engineer the installation to the specific wind speed and exposure category for your Sunrise address, pull the permit with the NOA documentation, and schedule inspection after installation to verify proper track anchorage and spring wind-load rating.
What Impact Garage Doors Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Hurricane-Rated Garage Door (single car) | $1,800 - $3,500 |
| Hurricane-Rated Garage Door (double car) | $2,800 - $5,500 |
| Wind-Load Compliance (with structural reinforcement) | $2,200 - $4,000 |
| Wind-Load Compliance (direct replacement) | $1,800 - $3,500 |
Does my garage door need impact glass too?
If your garage door has window sections, those inserts must be impact-rated or protected with approved shutters under HVHZ rules; we specify PGT or CGI impact glass inserts or solid panel alternatives. Call (754) 253-0713 to review your current door configuration.
How long does impact garage door installation take?
Most single or double garage door replacements in Sunrise are completed in one day, with permit inspection scheduled for the following business day; structural header reinforcement may add a second day. Call (754) 253-0713 for a written timeline with your measured survey.
Custom & Geometric Windows in Sunrise
Custom and geometric windows in Sunrise solve the specific problem of 1970s-80s architectural features - arched transoms, octagonal accents, and oversized living room groupings - that original builders filled with single-pane fixed glass now failed or fogged. These openings were never standardized, so replacement requires measured-to-fit units that also satisfy HVHZ approval and, frequently, HOA color-matching requirements in communities like Welleby. Our Custom & Geometric Windows service begins with the sightline measurement you keep and ends with a documented photo record.
Geometric & Shaped Windows
Signs you need it
Fixed triangular, trapezoid, or octagonal accent windows with fogged glass, cracked seals, or aluminum frames that have oxidized to powder are common in Sunrise’s 1970s-80s ranch and split-level designs.
What it costs in Sunrise
Geometric and shaped window installation in Sunrise typically ranges from $900-$1,800 for standard polygon configurations and $1,400-$2,800 for complex multi-angle units requiring custom extrusions.
How we do it
We measure every angle and chord length on site, specify the unit from our PGT or CGI custom lines with documented NOA for the exact configuration, and fabricate to the measured survey dimensions with no field cutting of the frame.
Arched & Curved Windows
Signs you need it
Arched transoms above entry doors or curved fixed units in gable ends with cracked single-pane glass or failed sealant joints are signature features of Sunrise’s original construction that require custom replacement.
What it costs in Sunrise
Arched and curved window installation in Sunrise typically ranges from $1,200-$2,400 for standard radius configurations and $2,000-$4,000 for elliptical or compound curves requiring specialized bending equipment.
How we do it
We template the exact radius or ellipse on site with a flexible measuring jig, transmit the coordinates to the manufacturer for CNC bending of the aluminum extrusion, and install with custom flashing to match the curved head in the existing CBS block or stucco opening.
What Custom & Geometric Windows Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Geometric/Shaped Window (standard polygon) | $900 - $1,800 |
| Geometric/Shaped Window (complex multi-angle) | $1,400 - $2,800 |
| Arched/Curved Window (standard radius) | $1,200 - $2,400 |
| Arched/Curved Window (elliptical/compound) | $2,000 - $4,000 |
Can you match my HOA’s required window style in Sunrise?
Yes - we regularly source custom impact units in specific bronze, white, or mill-finish aluminum to satisfy both the Sunrise building department and HOA architectural review boards, with finish samples provided for your submittal. Call (754) 253-0713 to review your community’s requirements.
How do you measure irregular window shapes?
We use a flexible template system and digital angle gauge to record every vertex and radius point, then verify with a second measurement before fabrication begins; you keep the documented survey. Call (754) 253-0713 to schedule the measured survey for your custom openings.
Brands We Service in Sunrise
We install and service PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux across Sunrise, with parts and finish samples stocked at our Miami office for rapid turnaround on warranty and repair calls. Every product is specified by performance tier and price range, not by margin. See our brands for detailed specifications and NOA documentation.
Pricing for Windows & Doors in Sunrise, FL
| Service | Typical range in Sunrise |
|---|---|
| Single/Double Hung Window (vinyl, standard) | $650 - $1,200 |
| Single/Double Hung Window (aluminum, impact) | $850 - $1,400 |
| Horizontal Roller Window (standard) | $700 - $1,300 |
| Horizontal Roller Window (impact) | $900 - $1,500 |
| Entry Door (standard) | $1,200 - $2,500 |
| Entry Door (impact-rated) | $2,000 - $4,500 |
| Hurricane-Proof Front Door (standard) | $2,500 - $4,500 |
| Low-E/Argon Window (total installed) | $725 - $1,350 |
| ENERGY STAR Vinyl Window | $800 - $1,500 |
| Hurricane-Rated Garage Door (single car) | $1,800 - $3,500 |
| Hurricane-Rated Garage Door (double car) | $2,800 - $5,500 |
| Geometric/Shaped Window (standard) | $900 - $1,800 |
Prices in Sunrise run toward the higher end of these ranges when CBS block requires stucco repair, when HOA color-matching demands custom finishes, or when structural reinforcement is needed for wind-load compliance. The written quote from your measured survey is the final invoice - Haven Clause 1 means no change orders.
Neighborhoods We Serve in Sunrise
We install and replace windows and doors across Sunrise’s full range of residential communities, from original 1970s planned developments to newer infill construction. Scheduling and dispatch are coordinated from our Miami office, with crews serving Sunrise locally.
- Welleby
- Sunrise Lakes
- Sawgrass Estates
- New River Estates
- Plantation Acres (Sunrise border)
Most Sunrise neighborhoods are within our standard response window for measured surveys.
Service Area - Cities Near Sunrise
Our crews work throughout central and northern Broward County, with regular installations in Pompano Beach, FL, Oakland Park, FL, Deerfield Beach, FL, and Margate, FL. Every job in these cities follows the same Haven Standard: written price before work starts, verified crew, documented photo record, and the 365-Day Done Right Promise.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Sunrise
Yes - Sunrise requires a building permit for every window and door replacement, with proof of Miami-Dade NOA or Florida Product Approval for the HVHZ. We pull permits as standard practice, include the fee in your written quote, and schedule inspections. Call (754) 253-0713 to confirm permit requirements for your specific project.
Submit our product cut sheets and finish samples to your architectural review board before ordering; we provide the documentation and can coordinate directly with your HOA manager if needed. Most Sunrise planned communities require matching original frame color and profile. Call (754) 253-0713 and we’ll prepare the submittal package.
The 365-Day Done Right Promise covers every job - if it’s not done right, we make it right, written into the Haven Standard, not offered as a courtesy. Documented photo records from installation support any warranty claim. Call (754) 253-0713 and we’ll schedule a return visit under the promise.
Call (754) 253-0713 to schedule your free measured survey and written estimate. Every quote includes the documented product specifications, permit handling, and the 365-Day Done Right Promise - the same document from measurement to final invoice.
Six Reasons Homeowners Choose Sightline Windows & Doors Pompano Beach
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Pompano Beach Services
What Neighbors Say About Sightline Windows & Doors Pompano Beach
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Sunrise Customers Say
"Front door install went smoothly. Written warranty, clear price, no pressure to upgrade anything."
- Nils H."The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F."Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."
- Simone T.